| | | |

ABB – Lumacell: LRAU Series Recessed Architectural Battery Unit

Feb 20, 2026 - ABB - Lumacell LRAU Series Recessed Architectural Battery Unit 1

February 20, 2026

LRAU Series Recessed Architectural Battery Unit Offers a Versatile Emergency Lighting Solution

The LRAU Series of recessed emergency lighting units from Lumacell shall include an all-metal housing and a thermoplastic rectangular trim-plate with a detachable circular trim ring for choice of aesthetics. The optics shall be an impact-resistant polycarbonate lens with fixed light distribution, optimized for ceiling heights up to 3.7m (12′). The housing shall include an isolated compartment for electrical connections and a detachable cover with knockouts for electrical supplies.

The LRAU Series unit shall include a hardware kit for installation in T-bar suspended ceilings. The emergency lights shall be four high-intensity LED with operational life of minimum 36,000 hours, until 70% of the initial light level (reported L70). The LEDs shall have redundant interconnections: eventual failure of one of them shall allow others to function. The unit shall have a two-wire universal input rated 120-347VAC, 50/60Hz and shall be equipped with a lithium battery.

The charger circuit shall provide: AC lock-out, brownout transfer, and battery disconnect at the end of discharge. The charger shall be micro-controller-based and include self-test and diagnostic functions; the unit shall self-test for one minute every month, 30 minutes every six months and 90 minutes annually.

Feb 20, 2026 - ABB - Lumacell LRAU Series Recessed Architectural Battery Unit

The pilot light shall be a bi-color LED, installed behind the main optics and shall change color from normal green to flashing red when a failure is detected from the battery, charger circuit or lamps. A label located on the equipment housing shall describe the diagnostic for each flashing code. The unit shall be supplied with an infrared remote test control to start a manual test of one-minute duration or cancel it if needed. The unit shall be cUL certified to CSA 22.2 No.141

The LRAU Series has a fixed lighting distribution, optimized by design for ceiling heights up to 3.7m (12′). The LRAU Series delivers a stable and optimal illumination easy to specify. Along an office corridor the space coverage ranges from 18.9 to 24.4m (62 to 80′). The square distribution pattern covers a surface of 67.2m2 (729 ft²).


Specifications

  • Recessed installation in T-bar suspended ceiling and easily spring mounted in Gyproc ceiling
  • All-metal backbox enclosure
  • Thermoplastic rectangular fixture with additional round trim-plate, white finish
  • Long-life, high-temperature rated lithium battery
  • Infrared remote test control (up to 9.1 m/30′)
  • Two-wire universal AC input: 120 – 347VAC 50-60Hz
  • 90 minutes of emergency lighting
  • Fixed optics, optimized light distribution for ceiling heights up to 3.7 m [12′]
  • Four high-intensity LED sources with redundant connections; CCT 5000K
  • Listed NSF, splash non-food zones
  • Certified cUL to CSA 22.2 No.141
  • Optional housing for plenum or insulated ceilings (IC)
  • Black thermoplastic decorative trim-plates
  • NEXUS Pro: IOT emergency lighting monitoring system optional
  • Fixed, square distribution pattern up to 3.7 m [12′] ceilings
  • Self-test and diagnostic functions

For more information on ABB – Lumacell lighting solutions HERE

Feb 20, 2026 - ABB - Lumacell LRAU Series Recessed Architectural Battery Unit

Source

Related Articles


Changing Scene


Design

  • Liteline: Splitsville in Hamilton, Ontario – Lighting Project Highlight

    Liteline: Splitsville in Hamilton, Ontario – Lighting Project Highlight

    At Splitsville in Hamilton, Ontario, PEGA is suspended across all 34 lanes, creating a cohesive lighting design throughout the space. Each fixture is paired with OnCloud, enabling independent control and wireless connectivity. OnCloud is a natural fit for this bowling alley. From daily operations to league nights, special events, and private parties, lighting scenes and… Read More…

  • CDm2 LIGHTWORKS: The Real Work of Value Engineering – A Collaborative Approach

    CDm2 LIGHTWORKS: The Real Work of Value Engineering – A Collaborative Approach

    It’s a situation most lighting designers have experienced: a project you spent months designing comes back with a request to review and accept a value engineering package. You’ve seen it time and time again, a package of substitutions with a carrot of cost savings and a deadline. There’s no true value engineering offered, only substitution… Read More…


New Products

  • Emerson: Appleton Explosionproof Rigmaster LED Series Luminaires

    Emerson: Appleton Explosionproof Rigmaster LED Series Luminaires

    Appleton Explosionproof Rigmaster LED Series Luminaires are a high-performance linear lighting solution in a rugged, corrosion-resistant housing, that can be ordered as a standard model or with emergency battery backup to fit all your hazardous location requirements. Providing comfortable, uniform illumination in a lightweight, low-profile design, the diverse mounting bracket options ensure this luminaire is… Read More…

  • Leviton | Viscor: Certolux – MBHSL LED Wall Mounted Behavioural Health Step Light

    Leviton | Viscor: Certolux – MBHSL LED Wall Mounted Behavioural Health Step Light

    The MBHSL Step Light is a durable, low-profile step light engineered to deliver safe, controlled illumination in demanding healthcare environments. Designed specifically for behavioral health and medical applications, it provides subtle wayfinding light that supports patient and staff movement without disrupting rest or comfort. Installed easily into a standard single-gang outlet box, the MBHSL Step Light integrates… Read More…