View of “Or Approved Equal” Products

July 23, 2018

John Kerr

From our view of the Canadian electrical industry and as a member of the industry that understands how our readers buy, specify, install and maintain electrical equipment nationally, we want to enter into “the approved or equal” debate that seems to be happening more often than not of late. We are hearing about this on commercial, institutional and industrial projects in all areas of the country.

Too often I have heard of presentations being made by many electrical equipment suppliers to consultants and consulting engineering firms where presentations are crafted to address specific needs and applications. The intention of presenting the firm’s products is to be named in the specification only to be told that “or approved equal” would be how they would amend the spec. 

“Or approved equal” is problematic. The supplier partners to the mechanical and electrical engineering community often assist consultants in designing a project, advise on best practices, and educate on the current Canadian codes and standards as they apply to the application. They provide product training, provide data, show precedents in other scenarios, and add value beyond the product offering.  

What we see is that not being listed in the specifications means that they are no longer on a level playing field with named products that may have been in the specifications for years without change and products that may no longer even apply in some cases.

For the consultant, using an old specification lists outdated products or manufacturers that may not even supply the required products, may no longer be available in Canada, and may no longer have the channel partnerships here to support it. 

Sadly, this is a lose/lose scenario for the industry as electrical contractors and electrical distributors are hesitant to believe that certain products are acceptable, even though it may have been the design standard on the project; but was not named because the standard specification, in use for years, was not revised.

Even in cases where the potential supplier is not named in a specification, but wishes to bid, they usually  include a covering statement to make the distributor aware that are acceptable to the consultant. Without the specific listing in the specification or on the drawings the distributors may not move and may not pass this information to the contractor. 

Unfortunately, if the distributor and contractor carry a product that is not named they risk the chance of being penalized should the product they carry in their quote not be acceptable to the consultant. 

The economic impact to the building owner is that single product suppliers named in specifications can and often do have a higher, non-competitive price. The result is that there is limited competition on the project and the building owner pays a higher price than they should for specified components in the building.

The economic impact to the consultant is the resulting loss of productive time spent reviewing and changing drawings and submittals multiple times to properly select the right equipment, especially when out-of-date specifications and drawings do not reflect current products, codes and practices. It’s surprising, given how competitive the consulting industry is, that these oversights continue. 

The reality is that many electrical equipment manufacturers and suppliers that commit to the Canadian market with staff and resources understand the Canadian needs and herein provide engineering assistance by reviewing projects. In this role they often catch small oversights and sometimes mistakes that avoid major extras. 

More often than not as a value-added component they provide this assistance at no cost, even though they bear the burden of the time and the cost of that time invested by their engineering staff. Too often local distributors and contractors are unable to take advantage of the new products and its features because of the fear the product may not be acceptable. 

The reality is product development continues, end users are demanding new solutions and more features, contractors want easier installation and reliable supply and distributors want Canadian partners.  

Maybe it’s time to have an open debate and open dialogue. From our point of view there are great products and solutions not being used today that could save time and money, as well as build better foundations for the future of the supplier, engineering, customer and wholesaler partnership.

Photo source: Tumisu at Pixabay.


John Kerr is Publisher of Canadian Electrical Wholesaler.

Related Articles


Changing Scene

  • LEDVANCE Expands Ontario Presence with New Specification Agent

    LEDVANCE Expands Ontario Presence with New Specification Agent

    LEDVANCE is pleased to announce the appointment of Sterling Architectural Products Ltd. (Sterling Lights) as their new specification agent in Ontario. This partnership strengthens LEDVANCE’s presence in the region and reinforces their commitment to serving the professional lighting design and specification community with innovative, reliable lighting solutions. With decades of experience and a service-driven mindset,… Read More…

  • May 29, 2025 - Eureka Wins Three 2025 Red Dot Awards for Product Design

    Eureka Wins Three 2025 Red Dot Awards for Product Design

    Eureka is pleased to announce that its Velia, Cirra, and Junction luminaires have each received a 2025 Red Dot Design Award for Product Design. It is the 11th consecutive year that Eureka products have been honored with this prestigious award, which is a testament to the company’s consistency and relentless drive to design exceptional luminaires.… Read More…


Design

  • What is Human Centric Lighting: Benefits & Applications

    What is Human Centric Lighting: Benefits & Applications

    Human centric lighting (HCL) is a kind of illuminated way based on human physical and psychological needs. Its core goal is to imitate the changes in natural light to support the body’s circadian rhythm, improve visual comfort, and enhance mood. The key element of human centric lighting contains dynamic ​color temperature adjustment, adjustable brightness, spectrum… Read More…

  • Mac’s II Agencies: Case Study – Tesoro, Vancouver, BC

    Mac’s II Agencies: Case Study – Tesoro, Vancouver, BC

    At the crest of False Creek, Tesoro stands as a contemporary interpretation of classic luxury, offering 92 exclusive waterfront homes in the heart of Vancouver. Developed by Concert Properties, this 17-story residential tower embraces a distinctly modern character, harmonizing sleek design with timeless sophistication. The vision for Tesoro extended beyond its architectural presence—it was about… Read More…


New Products

  • GVA Lighting: PIXEL GEN2 COLOR CHANGING

    GVA Lighting: PIXEL GEN2 COLOR CHANGING

    PIXEL GEN2 is the second generation of the direct-view PIXEL series, designed for dynamic color effects, low-resolution image displays, and media façades. Built on the award-winning COLOR-STREAM platform, it delivers 16X faster communication than DMX, ensuring ultra-smooth dimming and real-time responsiveness. With INFINITY technology, PIXEL GEN2 supports lighting circuits of up to 1,565 PIXELs, providing… Read More…

  • Cyclone Lighting Introduces New Taji Luminaire

    Cyclone Lighting Introduces New Taji Luminaire

    Cyclone Lighting is excited to announce the release of its new Taji luminaire. Taji’s captivating design features high-performance optics and enhances a variety of aesthetics. Taji’s distinctive, stylish silhouette and slender lines are a refreshing departure from the ubiquitous dome luminaire. The unique flared form maintains a slender, minimalist feel yet provides high-performance optics. The… Read More…