GVA Lighting IP-SF 3 Waterproof LED

GVA

November 10, 2017

GVA’s IP-SF3 is a low voltage, low wattage LED light module offering an energy efficient, reliable and low cost lighting solution for both indoor and outdoor installations. Typical applications include cove and under-cabinet lighting, backlighting and channel letter signs, delineation and any application where moisture or extreme temperatures may occur.

Each module consists of three LEDs available in 6 color temperatures of white as well as Amber, Red, Green and Blue. The modules are completely sealed and IP65 rated for wet locations and can operate in ambient temperatures from -40°C to +50°C.

Each module is only 54mm long, 16mm wide, 9.5mm high and connected to adjacent modules with 70mm jumper wires (max. 150mm center-to-center). The compact size and flexibility of an IPSF-3 assembly affords unlimited installation options. Standard assemblies are sold with 100 modules.

The IP-SF3 modules can be mounted with the pre-applied Very High Bond (VHB) double sided tape or with screws through the predrilled mounting flanges on each end of the module.

For more information:

https://cdn.gvalighting.com/wp-content/uploads/2014/09/PG-IP-SF-3-09.05.13.pdf

 

Related Articles

Changing Scene

Design

  • Zaneen: Answering Your LED Questions

    Zaneen: Answering Your LED Questions

    The Zaneen team wanted to take a moment to tell you more about Light Emitting Diodes (LEDs) by answering some common questions. They begin by defining what a LED means and describe a few of its technical details and then look into the importance of LED technology, the advantages of using LEDs, and some must-know… Read More…

  • Lumenpulse: A Look at the Past & Future of LED Binning

    Lumenpulse: A Look at the Past & Future of LED Binning

    In the lighting industry, the act of “binning” of LEDs is the process of sorting LEDs by certain characteristics, such as colour, voltage, and brightness. The ANSI standard C78.377-2017 provides the dimensions and coordinates of the bins that are currently used to standardize the colour points of all white light LEDs. These dimensions are calculated… Read More…

New Products

  • Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco’s BLADE SYSTEMS brings the Light Guide Plate optics behind the BLADE circular family to linear lighting, in the same ultra-slim 3/4″ profile. A micro-dot pattern engraved into optical-grade acrylic converts edge-mounted LED light into smooth, uniform illumination with low glare, achieving UGR below 19 in direct/indirect configurations. Built as a true system, straight… Read More…

  • GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    PS-INF-3.5KW is a state of the art, high power density, outdoor rated power supply designed by GVA Lighting for INFINITY circuits. Accepting a broad range of input voltages and delivering up to 3.5 kW of power from a compact and robust form factor, PS-INF-3.5KW enables circuit lengths upwards of 420 m (1377 ft). Read More…