Luminit Introduces Economical Edge-lit Uniformity Tape for LED Display and Lighting

Luminit Edge-Lit

Luminit LLC’s new Edge-lit Uniformity Tape (EUT) has a transmission greater than 88%, allowing display and lighting manufacturers to achieve better uniformity and brighter displays and fixtures without increasing the number of LEDs. An inexpensive and effective solution for solving common problems associated with widely spaced LEDs, EUT uses Luminit’s patented diffusion technology to transform and improve light for brighter, more uniform panels.

The Luminit EUT uses an optically clear adhesive backing that can easily be applied directly to the side of the light guide plate during the assembly process. On the tape facing the light source are highly elliptical LSD microstructures that spread the light to reduce hot spots, dark spots and other non-uniform characteristics that can be visible on the edges of LED flat panel TVs and edge-lit lighting fixtures.

According to Luminit, optical characteristics of EUT include a transmission frequency greater than 88% and lighting panel uniformity greater than 80%. Light spread angle is +/- 70° from the normal. EUT is available in 50-metre rolls and widths ranging from 2.8mm to 7.8mm.

Luminit is a privately held high-tech company specializing in custom and standard holographic light shaping diffusers. For more information, contact info@luminitco.com

 

>> Source ALL of your Canadian Electrical products in the Goldbook Directory <<

 

 

 

 

 

 

Related Articles

Changing Scene

Design

  • Zaneen: Answering Your LED Questions

    Zaneen: Answering Your LED Questions

    The Zaneen team wanted to take a moment to tell you more about Light Emitting Diodes (LEDs) by answering some common questions. They begin by defining what a LED means and describe a few of its technical details and then look into the importance of LED technology, the advantages of using LEDs, and some must-know… Read More…

  • Lumenpulse: A Look at the Past & Future of LED Binning

    Lumenpulse: A Look at the Past & Future of LED Binning

    In the lighting industry, the act of “binning” of LEDs is the process of sorting LEDs by certain characteristics, such as colour, voltage, and brightness. The ANSI standard C78.377-2017 provides the dimensions and coordinates of the bins that are currently used to standardize the colour points of all white light LEDs. These dimensions are calculated… Read More…

New Products

  • Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco’s BLADE SYSTEMS brings the Light Guide Plate optics behind the BLADE circular family to linear lighting, in the same ultra-slim 3/4″ profile. A micro-dot pattern engraved into optical-grade acrylic converts edge-mounted LED light into smooth, uniform illumination with low glare, achieving UGR below 19 in direct/indirect configurations. Built as a true system, straight… Read More…

  • GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    PS-INF-3.5KW is a state of the art, high power density, outdoor rated power supply designed by GVA Lighting for INFINITY circuits. Accepting a broad range of input voltages and delivering up to 3.5 kW of power from a compact and robust form factor, PS-INF-3.5KW enables circuit lengths upwards of 420 m (1377 ft). Read More…