Castor’s Award-Winning Induction Wall Light

August 6, 2018

Castor Design is a Toronto-based practice run by Brian Richer, a trained architectural stone carver with a degree in English literature and philosophy, and Kei Ng, a trained architect with a background in set design. They are interested in the middle ground between art and design, bringing a sense of irreverence to each project. Materials and their reuse make up an important part of Castor’s aesthetic: burnt out bulbs to make lighting, a rusty shipping container to make a sauna.

This brings us to Castor’s award winning Induction Wall Light, which uses a scientific concept to approach lighting in a unique way. It powers a burnt-out fluorescent bulb through an electromagnetic field.

A fluorescent bulb is normally lit with a wired connection at each of its pins, sending power through the filaments at either end and causing collisions between electrons inside the tube, which then give off light as they pass through the bulb’s phosphorous coating. When a bulb is burnt-out, it will be blackened on its ends, indicating that the fuses are blown and that it will no longer work in a standard fluorescent lighting setup. Despite the fact that the bulb seems useless as is, it can still be lit through electromagnetic induction.

Electromagnetic induction is the production of voltage due to a change in the magnetic field. Inside the Induction Wall Light’s box is a circuit and a coil of copper wire wrapped around an iron core. Stomping on the Induction Wall Light’s foot switch activates a circuit inside the switch base, transferring power around the iron core, which then sends electrical current through the wire to the bulb resting in the lamp holder. The active current stimulates the gases inside the fluorescent bulb, which in turn causes the bulb to emit light.

Recalling that a fluorescent bulb is normally lit through a wired connection at its pins, the Induction Wall Light leaves the bulb’s pin exposed to further demonstrate that it uses a magnetic field to transfer electrical current to a regular fluorescent bulb. When lit through induction, the quality of the light is also different. Compared to standard fluorescent lighting, the bulb’s glow is less harsh overall, and is slightly brighter in the side closest to the field source. The temperature of the light given off depends on the amount and type of gas in the bulbs.

The Induction Wall Light offers an opportunity to find interesting new uses for existing materials without letting them go to waste. Rather than destroying a fluorescent bulb, which would release gases that might be environmentally harmful (i.e. Argon and Mercury gases are commonly used in fluorescent bulbs), the Induction Wall Light can power any intact fluorescent bulb. It demonstrates that there is still life left in old bulbs even though they seem exhausted.

All of the components of the Induction Wall Light. Recycled fluorescent bulbs are given a new life by igniting the gases inside rather than being activated by the pins on either end.

 

Castor Design has won awards from the A+ Awards, A’ Design, AZ Awards, and from numerous design shows. The Induction Wall Light received Best Lighting Design at the 2018 AZ Awards, in addition to a Metropolis Magazine award in New York during ICFF 2018.

Castor’s products are sold in shops around the world, and they have worked on interior projects, custom lighting and furniture design, and public art commissions throughout North America, Europe, and Asia. Their experience in restaurants and love of music inspired them to open Parts & Labour (www.partsandlabour.ca/), a space that combines a fine-dining room with a punk rock basement venue, and its offshoot, P&L Burger (www.thepnlburger.ca/).

Photos credits: Peter Andrew Lusztyk

Related Articles


Changing Scene

  • LEDVANCE Expands Ontario Presence with New Specification Agent

    LEDVANCE Expands Ontario Presence with New Specification Agent

    LEDVANCE is pleased to announce the appointment of Sterling Architectural Products Ltd. (Sterling Lights) as their new specification agent in Ontario. This partnership strengthens LEDVANCE’s presence in the region and reinforces their commitment to serving the professional lighting design and specification community with innovative, reliable lighting solutions. With decades of experience and a service-driven mindset,… Read More…

  • May 29, 2025 - Eureka Wins Three 2025 Red Dot Awards for Product Design

    Eureka Wins Three 2025 Red Dot Awards for Product Design

    Eureka is pleased to announce that its Velia, Cirra, and Junction luminaires have each received a 2025 Red Dot Design Award for Product Design. It is the 11th consecutive year that Eureka products have been honored with this prestigious award, which is a testament to the company’s consistency and relentless drive to design exceptional luminaires.… Read More…


Design

  • 60-Watt vs 100-Watt Light Bulbs: Brightness & Wattage

    60-Watt vs 100-Watt Light Bulbs: Brightness & Wattage

    With the widespread use of LED light bulbs, the replacement and upgrade of different light bulbs have also made the concept of “equivalent wattage” more and more discussed. When comparing 60-watt vs 100-watt bulb, the wattage and brightness are the factors that need to be figured out first. Wattage is used to measure the energy consumption while many… Read More…

  • What is Human Centric Lighting: Benefits & Applications

    What is Human Centric Lighting: Benefits & Applications

    Human centric lighting (HCL) is a kind of illuminated way based on human physical and psychological needs. Its core goal is to imitate the changes in natural light to support the body’s circadian rhythm, improve visual comfort, and enhance mood. The key element of human centric lighting contains dynamic ​color temperature adjustment, adjustable brightness, spectrum… Read More…


New Products

  • Zaneen: Vieni Giù – Rain of Light

    Zaneen: Vieni Giù – Rain of Light

    Vieni Giù brings a touch of elegance and modernity to any space with its sleek, thin rods suspended from a cable or ceiling mount, each featuring exquisite chrome plating. These rods illuminate every corner like luminescent rain, thanks to the LED double-pin encapsulated in borosilicate glass. Available in various lengths, Vieni Giù can be tailored to… Read More…

  • LightForm: New Saule-L-01 Suspension Luminaire

    LightForm: New Saule-L-01 Suspension Luminaire

    LightForm is thrilled to introduce Saule, the newest lighting collection from Quebec atelier Larose Guyon, now exclusively available at LightForm. Inspired by the gentle grace of the willow tree, Saule is a sculptural light that feels alive. Cascading hand-formed brass leaves shimmer like foliage in the breeze, suspended from arched metal arms that echo the tree’s elegant… Read More…