How the Right Lighting Could Save the Mona Lisa

July 22, 2019

Dorukalp Durmus 

Next time you’re in a museum or art gallery, observe each painting a little more closely. You may notice cracks on the surface of the canvas, especially if the painting is very old.

The damage you see is caused by radiant energy striking the painting’s surface — and light (visible radiation) causes irreversible damage to artwork.

However, all is not lost. Our new research shows that optimized smart lighting systems can reduce damage to paintings while preserving their colour appearance.

The dilemma

Damage to artwork by infrared, ultraviolet and visible radiation is well documented. When a photon (an elementary light particle) is absorbed by a pigment in paint, the pigment molecule elevates to a higher energy state. In this excited state, the molecule’s chemical composition changes. This is called a photochemical action. 

Viewed from the human perspective, the photochemical action manifests itself as cracks, discolouration, or surface hardening.

Not surprisingly, daylight, which includes infrared and ultraviolet radiation, is highly damaging to paintings. In museums, it is common practice to use incandescent, and more recently, LEDs, to reduce damage. 

However, a group of researchers showed that light can cause colour degradation regardless of the lighting technology. Bright yellow colours in Van Gogh’s famous Sunflowers are turning dark brown due to absorption of blue and green light from LEDs. Research on the conservation of artwork makes it look like this is a losing battle. 

Of course, you will be right in thinking that the best conservation method would be the complete absence of light. But we need light for visibility and to appreciate the beauty of a painting. This leaves us with a dilemma of two conflicting parameters: visibility and damage.

Light optimization

Lighting technology in itself may not be enough to tackle this dilemma. However, the way we use technology can make a difference. 

Our approach to address this problem is based on three key facts: 

  1. light triggers photochemical actions only when it is absorbed by a pigment
  2. the reflectance factor of a pigment (its effectiveness in reflecting light) determines the amount of light absorption
  3. light output (composition of the light spectrum, and the intensity of the light) of lighting devices, such as LEDs, can be fine-tuned.

It is possible to measure the reflectance factor of a painting and optimize lighting to reduce absorption. Previous research shows that optimizing light to lessen absorption can reduce energy consumption significantly, and with no loss in visual experience. Objects look equally natural and attractive under optimized light sources compared to regular white light sources. 

In this new study, we optimized LEDs for five paintings to reduce light absorption. Using a genetic algorithm (an artificial intelligence technique), we reduced light absorption between 19% and 47%. Besides the benefits for the painting, this method almost halved the energy consumed by lighting. 

In addition to increased sustainability and art conservation, the colour quality of the paintings was another parameter in our optimization process. Colour appearance and brightness of paintings were held constant not to lower the appreciation of the artwork.

This is possible due to a quirk in our visual system. Photoreceptor cone cells, the cells in our retinas that enable human colour vision, are not equally sensitive to the whole visible spectrum. 

Different combinations of wavelength and intensity can result in identical signals in our brain. This understanding gives us the flexibility of using different light sources to facilitate identical colour appearances. 

This smart lighting system requires scanning of the artwork to obtain colour information. Then, a precise projection system emits optimized lighting to the painting. 

This method offers a solution to extend the lifetime of works of art, such as the world-famous Mona Lisa, without leaving them in the dark.

Dorukalp Durmus is an Honorary Associate, University of Sydney. This article was first published online by the University of Sydney: theconversation.com/how-the-right-lighting-could-save-the-mona-lisa-95938. It has been lightly edited.

Photo source: Juan Di Nella on Unsplash

Related Articles


Changing Scene

  • March 19, 2026 - Wow Lighting and Controls Proudly Celebrates 70 Years in the Lighting Industry

    Wow Lighting and Controls Proudly Celebrates 70 Years in the Lighting Industry

    This year, Wow Lighting and Controls proudly celebrates 70 years in the lighting industry! During that time, Wow Lighting and Controls has been a trusted expert in Alberta’s lighting industry. Their independence and entrepreneurial spirit have been key to their success, allowing them to cultivate strong relationships with clients, customers, and manufacturing partners while delivering innovative lighting solutions. Read More…

  • March 18, 2026 - Liteline Presents ATTRACKT - New Product Webinar - March 31, 2026

    Liteline Presents: ATTRACKT – New Product Webinar – March 31, 2026

    Join Liteline for the launch of ATTRAKT, a low-voltage magnetic lighting system designed for modern spaces. ATTRACKT’s compact, refined form factor delivers exceptional flexibility, with fixtures that can be easily positioned and reconfigured to suit evolving lighting needs. With versatile modules and connectors to create customized layouts, ATTRACKT provides a clean, modular solution that elevates… Read More…


Design

  • Prolux Lighting & Controls: Lighting Project Highlight – The Westin Pool, Calgary

    Prolux Lighting & Controls: Lighting Project Highlight – The Westin Pool, Calgary

    Lighting natatorium environments requires fixtures that can withstand humidity, chemicals, and demanding conditions, without compromising the architectural design of the space. For this project, the team specified the LumenWerx VIA2 Seal above the pool with a natatorium finish, designed specifically for high-moisture environments. Traditional natatorium fixtures are often large and bulky to ensure durability, but… Read More…

  • CSC LED: Why Blue Light at Night Is a Problem & How Amber Optics Solve It

    CSC LED: Why Blue Light at Night Is a Problem & How Amber Optics Solve It

    Outdoor lighting plays a critical role in safety, visibility, and security—but not all light is created equal. In recent years, increased awareness around blue-rich white light has raised important questions about its impact on human health, wildlife, and the night sky. As municipalities, designers, and property owners look for better solutions, Amber Optics are becoming… Read More…


New Products

  • Magic Lite: Modern Pathway Light

    Magic Lite: Modern Pathway Light

    Discover the subtle elegance of the L-shaped Modern Pathway Light from Magic Lite, designed to complement contemporary outdoor settings with its sleek and classy design. This pathway light is perfect for those looking to enhance their landscape with a reliable, energy-efficient lighting solution. The cast aluminum body ensures durability and weather resistance, and easily mounted… Read More…

  • LEDVANCE: Jelly Jar Light, Hazardous Location – HAZ JJAR 020 UNH D 8 30 CSL GR

    LEDVANCE: Jelly Jar Light, Hazardous Location – HAZ JJAR 020 UNH D 8 30 CSL GR

    Designed for durability and safety in demanding environments, the LEDVANCE Jelly Jar Hazardous Location light features a compact structure with a robust metal guard. It supports multiple installation options to suit a variety of industrial and hazardous location applications and is an ideal choice for areas requiring reliable, rugged illumination. Read More…