DLC Publishes Networked Lighting Control Technical Requirements 3.0

LDS 22 CS DLC 400

November 7, 2018

DesignLights Consortium recently updated its technical requirements for networked lighting control systems to qualify for listing in the organization’s Qualified Products List for Networked Lighting Control Systems, which is used by a growing number of utilities to qualify products for rebates promoting this technology.

Networked Lighting Control Technical Requirements 3.0 adds scene control as a reported capability of indoor and outdoor systems. It also identifies cybersecurity compliance with ANSI UL 2900-1, IEC, ISO 27000, and NIST standards.

Scope of technical requirements

These are requirements for interior and exterior networked lighting control (NLC) systems associated with commercial and industrial buildings, roadways, and exterior environments. NLC systems are defined for the purposes of these requirements as the combination of sensors, network interfaces, and controllers that effects lighting changes to luminaires, but does not include the luminaires themselves. Any luminaire-specific control requirements are addressed separately by the DLC’s Solid-State Lighting Technical Requirements (www.designlights.org/solid-state-lighting/qualification-requirements/) and Qualified Products List (www.designlights.org/search).

This revision of this technical requirements document is the first one to accept DC and PoE networked lighting control systems in conjunction with the SSL Luminaire DC and PoE Policy to be released in September 2018. Please note that while the DLC will accept and begin processing DC and PoE based NLC applications beginning in June 2018, to avoid confusion with rebate/incentive programs, the DLC will not publicly qualify and list DC/PoE control systems until the corresponding SSL application process is available. 

Find out more: www.designlights.org/lighting-controls/qualify-a-system/technical-requirements/.

Related Articles

Changing Scene

  • Oct 8, 2026 - Canada Light Expo 2026 To Unite Canada’s Lighting Industry Under One Roof - CLE 2026

    Canada Light Expo 2026 To Unite Canada’s Lighting Industry Under One Roof

    Canada Light Expo 2026, the country’s premier exhibition for the lighting and LED technology sector, will return to the International Centre, Toronto, on 18–19 November 2026. Marking its 3rd edition, the event is expected to bring together more than 100 leading brands and showcase over 1,000 lighting solutions, connecting manufacturers, designers, specifiers, distributors, contractors, and… Read More…

  • Oct 7, 2026 - Eureka Wins Multiple GRANDS PRIX DU DESIGN Awards

    Eureka Wins Multiple GRANDS PRIX DU DESIGN Awards

    Eureka is pleased to announce that five of its luminaire families have been recognized in the 19th edition of the GRANDS PRIX DU DESIGN Awards. Jarry, Orelia, Scout Accessories, Torno, and Tulip all received GOLD CERTIFICATION in the Product Design – Lighting/Indoor Lighting Fixture category. The GRANDS PRIX DU DESIGN Awards is an international competition… Read More…

Design

  • LEDVANCE: Toyota Lighting Case Study – Brossard, Quebec, Canada

    LEDVANCE: Toyota Lighting Case Study – Brossard, Quebec, Canada

    Located 15 minutes from Montreal, Toyota’s Quebec Regional Office in Brossard, Canada houses a first-floor training and service area, and second-floor offices where financial services and dealer network operations are conducted.  With environmental sustainability representing a core pillar of Toyota’s mission, the Brossard location has long been committed to embracing products and practices that conserve… Read More…

  • CSC LED: How Product Availability Impacts Project Timelines

    CSC LED: How Product Availability Impacts Project Timelines

    When planning an LED lighting project, the focus is usually on performance, specifications, budget, and application requirements. But there is another factor that can have just as much impact on the project: product availability. A fixture may be the right choice on paper, but if it is not available when needed, it can affect installation… Read More…

New Products

  • SATCO|NUVO: Dual Head Security Lights – Bullet & Square Heads Models

    SATCO|NUVO: Dual Head Security Lights – Bullet & Square Heads Models

    SATCO|NUVO’s Dual Head Security Lights deliver dependable outdoor illumination for residential and commercial applications. Available in traditional bullet head designs as well as architectural square heads, these fixtures feature selectable 3000K, 4000K, and 5000K color temperatures and are offered in black, white, and bronze finishes to complement a variety of exteriors. Constructed from rugged die-cast… Read More…

  • ABB Ready-Lite: RSAUR Series – Surface-Mount Architectural Remote Fixture

    ABB Ready-Lite: RSAUR Series – Surface-Mount Architectural Remote Fixture

    The RSAUR Series surface-mount architectural remote fixture is designed specifically for installations requiring a junction box, whether recessed, surface-mounted, or suspended. Engineered for easy installation, it combines performance with simplicity and style, making it a smart choice for commercial and architectural environments. Recognized with Grands Prix du Design | Gold Certification 2026. Read More…