A Comprehensive Look at Privacy and Cybersecurity in the Connected Home

EIN CABA report 400

April 9, 2021

It is critical to put the consumer at the center of the discussion, says new report that sets out a measured response plan the industry can use to fast-track solutions.

Cybersecurity and privacy concerns in the smart home have the potential to worsen with device ownership and demand for gadgets growing. In building their solutions, industry participants should therefore treat cybersecurity protections as the norm. Looking past functionality and user experience, privacy also needs to be factored into the process.

These were among the key recommendations of CABA’s Privacy and Cybersecurity in the Connected Home Landmark Research project, carried out by CABA member Frost & Sullivan. “Cybersecurity and privacy remain perhaps the foremost challenges for the connected home industry right now, compounded by technology adoption by new demographic segments, such as older adults and children and large numbers of young adults,” said Ron Zimmer, CABA President & CEO.

“This research sets out a measured approach that stakeholders can use to assess cyber risks and privacy infringement challenges in the connected home, hasten the development of market-wide solutions, and support the industry in a positive way.”

The research focused on understanding the implications of cybersecurity and privacy risks and ways of managing them. It reviewed the challenges of implementing protection measures and evaluated the perceptions of various industry stakeholders—including their level of accountability in managing the challenges. The analysis also provided best practices that can be prioritized to address the issue.

Strong adoption potential with high threat exposure
The consumer-focused portion of the research included a survey of approximately 1,100 consumers in North America. As much as 29 percent of connected-home adopters surveyed experienced some form of cyber breach over the last 12 months.

Consumers’ sophistication and vigilance with regard to connected-home solutions is increasing. Over 80 percent of survey respondents said they used unique, complex passwords for multiple devices and 49 percent were aware of privacy guidelines. However, consumers perceived the levels of privacy protection given by vendors and service providers to be very low.

“The privacy and cybersecurity concerns highlighted in the research pose a serious threat to the market prospects of connected-home solutions,” says Konkana Khaund, Director of Consulting, Energy and Environment with Frost & Sullivan. “This is further complicated by the growing ecosystem and the expanding technology stack that are increasing the potential for various vendors and service providers to inflict security breaches on each other’s networks.

“As different approaches strive for consensus in the areas of regulations, guidelines, and policy to address the stakeholder interests, it will be crucial for those efforts to account for interdependencies in risk mitigation, as well as to mature over time.”

Dynamic response plan
With a projected continued evolution in cyber threats, a dynamic response is required of key industry participants. Privacy is also a changing concept as consumers are introduced to novel experiences with emerging technologies and service experiences, the report notes. It is likely that expectations from vendors will shift as consumers weigh functionality, usefulness, and compromises to their privacy and anonymity.

For vendors and service providers, it is important to chart out a nimble and scalable response plan that can cope with their growth needs and consumers’ evolving demands for new connected products and solutions, the report recommends.

The research calls on solution providers to enhance their compliance levels, given the growing consumer sophistication and vigilance regarding the use of their devices and their expanding expectations of cybersecurity and privacy. But instituting prescriptive cybersecurity requirements and minimum privacy provisions in products requires collaboration between alliances and standards-development bodies to ensure that interoperability and cyber compliance is achieved consistently.

What remains to be seen is how much of this compliance can be institutionalized and mandated. As the report notes: “Interdependencies and crossover impacts will continue to challenge regulators, assimilators, integrators, aggregators, and above all, consumers. Adopting some of the best practices described in this research will help support the compliance agenda and fast-track the consensus needed to address cybersecurity and privacy challenges.”

The 120-page final report from this $130,000 US research project has just been released to the funding organizations. Anyone can download the 27-page Executive Summary—available as a free product in the CABA Store. The full report will also be added to the store following a 4-month embargo period.

Source

Related Articles


Changing Scene


Design

  • Liteline: Splitsville in Hamilton, Ontario – Lighting Project Highlight

    Liteline: Splitsville in Hamilton, Ontario – Lighting Project Highlight

    At Splitsville in Hamilton, Ontario, PEGA is suspended across all 34 lanes, creating a cohesive lighting design throughout the space. Each fixture is paired with OnCloud, enabling independent control and wireless connectivity. OnCloud is a natural fit for this bowling alley. From daily operations to league nights, special events, and private parties, lighting scenes and… Read More…

  • CDm2 LIGHTWORKS: The Real Work of Value Engineering – A Collaborative Approach

    CDm2 LIGHTWORKS: The Real Work of Value Engineering – A Collaborative Approach

    It’s a situation most lighting designers have experienced: a project you spent months designing comes back with a request to review and accept a value engineering package. You’ve seen it time and time again, a package of substitutions with a carrot of cost savings and a deadline. There’s no true value engineering offered, only substitution… Read More…


New Products

  • Emerson: Appleton Explosionproof Rigmaster LED Series Luminaires

    Emerson: Appleton Explosionproof Rigmaster LED Series Luminaires

    Appleton Explosionproof Rigmaster LED Series Luminaires are a high-performance linear lighting solution in a rugged, corrosion-resistant housing, that can be ordered as a standard model or with emergency battery backup to fit all your hazardous location requirements. Providing comfortable, uniform illumination in a lightweight, low-profile design, the diverse mounting bracket options ensure this luminaire is… Read More…

  • Leviton | Viscor: Certolux – MBHSL LED Wall Mounted Behavioural Health Step Light

    Leviton | Viscor: Certolux – MBHSL LED Wall Mounted Behavioural Health Step Light

    The MBHSL Step Light is a durable, low-profile step light engineered to deliver safe, controlled illumination in demanding healthcare environments. Designed specifically for behavioral health and medical applications, it provides subtle wayfinding light that supports patient and staff movement without disrupting rest or comfort. Installed easily into a standard single-gang outlet box, the MBHSL Step Light integrates… Read More…