Cisco Systems Canada Wins 2016 IES Lighting Control Innovation Award

March 6, 2017

The Canadian headquarters of IT giant Cisco Systems, an award-winning project, encompasses a 4-storey fit-out over 80,000 sq.ft. in Toronto, ON. The facility features a client-facing Innovation Centre that is one of a kind in North America. Aptly located within a new sustainability-leading downtown high-rise, the fit-up is targeting LEED Gold certification.

The Lighting Control Innovation Award was created in 2011 as part of the Illuminating Engineering Society’s Illumination Awards program, which recognizes professionalism, ingenuity and originality in lighting design. The award recognizes projects that exemplify the effective use of lighting controls in nonresidential applications.

Given the client’s “Internet of Things” mandate, base building fluorescent luminaires were replaced with LED Power over Ethernet (PoE) luminaires, boasting the first large-scale commercial installation of PoE-enabled luminaires in North America. This approach eliminated the need for line voltage power to the luminaires, reducing installed cost, adhering to budget constraints, and enabling the delivery of power and controls data via a single CAT6 data cable.

 

 

 

 

 

 

 

 

 

 

 

PoE lighting zones are powered via an 8-port data switch, installed in custom enclosures in the ceiling space. Line voltage powers the data switches, which can power up to 8 PoE luminaires each via CAT6 patch cables providing a maximum of 25.5W at 36VDC using the PoE+ protocol. Effectively implementing this new technology, the Lighting Power Density was reduced to 52.6% below ASHRAE 90.1 2007 allowances.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Approximately 50% of the PoE luminaires are outfitted with an integral occupancy/daylight sensor. Any luminaire without a sensor can be controlled via an adjacent fixture equipped with one.

Collaborating with the manufacturer, PoE fixtures were developed to match the base building luminaires for visual consistency.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For ease of use, all luminaires, including the PoE-enabled fixtures and architectural specialty lighting, are digitally addressable through a networked lighting control system.

All enclosed rooms are outfitted with a capacitive touch-sensitive programmable 6-button digital wall switch for scene and dimming control. These are also connected via CAT6 data cables. The luminaires can also be controlled or commissioned wirelessly with a smartphone via the IR receiver within the integral sensors.

Project participants

Lighting and control design by Justin Lauzon, Bill Trapper, lighting designers with The HIDI Group, and Neil Whiteford, lighting designer with Philips Lighting Canada. Photography by Tom Arban Photography. DALI Control and Programming by Specialized Lighting Solutions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Related Articles

Changing Scene

Design

  • Stanpro: 3 Tips to Ensure Efficient Lighting for a Hairdressing Salon

    Stanpro: 3 Tips to Ensure Efficient Lighting for a Hairdressing Salon

    Remember your last hair appointment: you’re in the waiting room. Perhaps you’re reading a book or magazine while you wait your turn. You’re watching the hairdressers as they cut, style and dye your hair. Have you ever wondered about salon lighting? Indeed, all these activities entail specific lighting requirements: hairdressers need to be able to… Read More…

  • LightForm: Unboring Project – The Flamingo, A Mid-Century Revival in Surrey, BC

    LightForm: Unboring Project – The Flamingo, A Mid-Century Revival in Surrey, BC

    Reviving a story that already exists is a compelling undertaking, especially if that story is steeped in nostalgia and reinvention. The Flamingo Project in Surrey, BC draws inspiration from the original Flamingo Hotel that once stood in the same spot. It was a mid-century modern destination that opened in 1955. Once known as a stylish… Read More…

New Products

  • SATCO|NUVO: Textured Finish, Decorative String Light Shade

    SATCO|NUVO: Textured Finish, Decorative String Light Shade

    Designed to reduce unwanted upward illumination while maintaining the warm, inviting atmosphere of decorative string lighting, SATCO’s Textured Finish String Light Shades deliver a more refined outdoor lighting experience. Featuring a textured metal finish for an industrial warm look, these shades are ideal for patios, restaurants, hospitality spaces, and outdoor gathering areas. Compatible with SATCO and many… Read More…

  • Cyclone Lighting Introduces New Stretto Luminaire

    Cyclone Lighting Introduces New Stretto Luminaire

    Cyclone has announced that it has released its Stretto luminaire. Stretto pairs a clean linear aesthetic with enduring performance for demanding urban environments. Stretto’s sleek, linear shape is designed to integrate naturally into contemporary urban environments. A subtle, continuous contour line wraps the luminaire, revealing two distinct sections that seamlessly unite into a single, composed… Read More…