|

Turning the Page on Fluorescent Lighting: Lutron’s C-Flex Solution

July 30, 2025 - Turning the Page on Fluorescent Lighting Lutron’s C-Flex Solution

July 30, 2025

Lutron’s C-Flex Retrofit Solution: Ballasts Are Out, Fluorescents Are Done, It’s Time to Move On

Starting in 2026, Canada will begin phasing out lamps that contain mercury — including the fluorescent tubes still widely used in commercial, institutional, and public buildings. This regulatory shift only adds to a reality already in place: fluorescent ballasts have not been manufactured for over two years.

That makes the question urgent:

How Can You Maintain Your Lighting Systems Without Replacing Everything?…

July 30, 2025 - Turning the Page on Fluorescent Lighting Lutron’s C-Flex Solution 2

Lutron C-Flex: A Simple & Effective Solution

In anticipation of these changes, Lutron developed C-Flex — a retrofit solution that enables a seamless transition to LED lighting without touching your existing infrastructure: wiring, conduits, fixtures, or even your current control system.

How Does It Work?

It’s a straightforward 1:1 replacement. Remove the old ballast, install the supplied LED driver, replace the lamps with the included LEDs — and you’re done!

No demolition. No waste. No compromise on performance or compliance.

And if your system isn’t Lutron? C-Flex is also compatible with many existing control systems, making the transition simple and accessible.

July 30, 2025 - Turning the Page on Fluorescent Lighting Lutron’s C-Flex Solution 3

Easy Installation, Full Compliance

Each C-Flex kit includes:

  • A Lutron LED driver (3-wire or EcoSystem)
  • C-Flex LED lamps by Light Efficient Design
  • All required connectors
  • Clear installation instructions
  • A compliance label for the fixture

Good News: In most cases, installation can be performed by on-site electricians — whether in commercial buildings or school facilities — without compromising the integrity of the fixture. (Subject to local code and policy verification.)

Economical. Ecological. Sustainable.

Choosing C-Flex means:

  • An affordable and fast-to-implement solution
  • A drastic reduction in waste (no cables or fixtures to discard)
  • Improved energy efficiency
  • Enhanced light quality
  • A proactive response to upcoming regulations

Have a Project in Mind? Contact Delage is Here to Help.

  • Still have fluorescent lamps in your buildings?
  • Managing aging lighting infrastructure?
  • Just looking to get ahead of what’s coming?

Get in touch with the Contact Delage team today.
They will help you make the transition to LED — hassle-free, waste-free, and most importantly, without starting from scratch.

C-Flex is your smart solution to turning the page — effectively.

For more information on the C-Flex HERE

July 30, 2025 - Turning the Page on Fluorescent Lighting Lutron’s C-Flex Solution

Source

Lutron’s C-Flex Lutron’s C-Flex Lutron’s C-Flex

Related Articles

Changing Scene

Design

New Products

  • Magic Lite: Tunable CCT Outdoor, High Power & Low Power

    Magic Lite: Tunable CCT Outdoor, High Power & Low Power

    The Tunable CCT Outdoor LED Tape Light offers versatile lighting with a colour temperature range of 2700K to 6500K. Designed for durability, it features a 3OZ copper PCB (8mm wide, 6.5mm thick) with 240 LEDs per meter, delivering smooth, gap-free illumination. Built for demanding environments, its IP67 rating ensures protection against water and dust, making… Read More…

  • ABB Emergi-Lite: EXP LED “Picto” Series

    ABB Emergi-Lite: EXP LED “Picto” Series

    The EXP LED Pictogram Series of battery equipment is designed to cover emergency lighting applications for the entire spectrum of hazardous locations, where inflammable gases, vapors, liquids, dust particles or fabrics tissues are permanently present or are likely to exist. The EXP LED Pictogram Series combines in one simple-to order catalogue family three traditional emergency… Read More…