| | |

Why Do LED Lights Flicker & How to Fix It

Jan 7, 2026 - LEDVANCE Why Do LED Lights Flicker & How to Fix It - LED Flickering

January 7, 2026

LED Flickering: LEDVANCE Provides Helpful Guide on How to Avoid This Common Lighting Issue

Are your LED lights flickering? It may reduce productivity, lower energy efficiency, and create safety risks. Fixing older fluorescent or incandescent bulbs was often straightforward. But when it comes to LED lights, the causes of flicker are not always immediately apparent.

In this article, let’s explore why LED lights flicker and the practical solutions to keep your lighting stable and reliable. Read on!


Part 1. Why Do LED Lights Flicker?

LED bulbs may flicker when the supply frequency is below 50 Hz. Loose or incorrect wiring, incompatible dimmer switches, or faulty bulb assemblies (such as defective LED drivers) can also cause LED bulbs to flicker. Other common causes include:​​

  • Defective LED Drivers​​: LED drivers not only operate as a system that manages current but also as a protection pad. Defective LED drivers can cause flickering due to increased susceptibility to heat over time.
  • Loose Wiring or Connections: Loose wiring or loose bulbs can cause the blinking LED lights. This is usually the result of improper handling during installation. If multiple lights are flashing simultaneously, there may be a problem with the panel or connection points that needs to be re-tightened.
  • Incompatible Dimmers: Another common cause is using an incompatible dimmer switch in the circuit. Dimmer switches work by rapidly turning a bulb’s power on and off multiple times per second, a method that doesn’t work well with most LED lights.
  • Inferior Fixtures or Light Bulbs: Lower-quality LED bulbs are more prone to flickering. High-quality bulbs are more expensive, but they can save you the cost of frequent repairs and replacements in the long run.​​​
  • Voltage or Power Surges: Voltage fluctuations can affect LED performance, especially with low-quality drivers. If there are devices in the same circuit that use high-power loads connected to your LED lights, high-quality drivers stabilize LED output. Repeated surges can wear out the drive and cause delayed failures.

Part 2. How to Fix Flickering LED Lights

1.) Verify Proper Installation of LED Lights

Identify the current setup with your LED lighting. The most common reason for a flickering T8, for example, is a loose connection somewhere in the circuit. Identifying wiring or power issues causing flicker will help resolve the problem. See how to do it below:

  • Examine the fixture for loose wiring and secure it.
  • Secure the screw-in lamp firmly in place.
  • Check connection points to ensure they are secure.
  • Turn off the power and secure any loose wiring as needed.

Phase-cut dimmer switches can cause flicker in modern LED circuits, which are not always compatible with this type of control.

2.) Avoid Voltage Changes

Ensure the supply voltage is stable and sufficient for all connected devices. 

3.) Locate the Defective Component of Your Flickering LED Lights

Components in your lights could be defective. If the product is under warranty, the manufacturer can repair or replace the defective component.

4.) Replace the Light Bulb with a Better Prod​uct

If flickering persists after all tests, replace the bulb. Older bulbs don’t have the same lifespan ratings as today’s products. For example, newer LED T8​ bulbs can last more than 50,000 hours while being more energy-efficient than the T8 fluorescent bulbs.​ These updated LED lamps are ideal for precision lighting applications. You’ll find them in retail locations, mechanics’ shops, studios, and even as task lighting. If you want something with an exceptional lifespan, consider upgrading to a flicker-free EPTA fixture. The L70 option has a rating that exceeds 200,000 hours, which can last for more than four decades with average use.

5.) Use Better Drivers

It’s a fact that budget-friendly products aren’t always cheaper than investing in something better. When you purchase low-quality LEDs, you’ll be more likely to encounter problems with the driver. Other than that, the other issue that impacts cheap drivers involves wattage surges. For example, if you have an appliance, space heater, or microwave that uses a significant power load on the same circuit as an LED, you can cause it to flicker.

Stable drivers help mitigate power spikes, reducing LED flicker. As a result, select an LED bulb that has the proper driver components. For example, full-featured drivers can isolate electrical noise and stabilize power delivery.

6.) Contact with the Flickering LED Bulb Manufacturer

If troubleshooting doesn’t solve the flicker problem, consult the manufacturer directly. Products under warranty are typically eligible for repair or replacement. For older bulbs that are out of warranty, the manufacturer can advise on suitable alternatives to ensure consistent lighting performance. 

7.) Choose a Professional Lighting Company

LEDVANCE brings decades of lighting experience together with the latest in LED and smart solutions. Their professional lighting products are engineered to reduce flicker and provide reliable performance. Partner with LEDVANCE to secure lighting solutions that meet high standards of efficiency, durability, and innovation. Contact their team today to discuss lighting solutions optimized for your business.


Bonus Tips: How to Upgrade the Older Bulbs to LED Lights?

When upgrading to LED, you can often replace an older bulb with a more energy-efficient one. Most designs are compatible with the latest fixtures. Ensure the circuit and switch are consistent with this technology in an older home.

Some LED solutions come as integrated fixtures. When installing a new fixture, take a photo of the wiring before disconnecting the old unit for reference. Older homes may lack a grounding wire. In this case, follow the manufacturer’s instructions. After installation, restore power to check for functionality and flickers. If flickering occurs, please refer to this guide to ensure you can complete the troubleshooting process quickly and effectively​​​​.

For more information on LEDVANCE lighting solutions HERE

Jan 7, 2026 - LEDVANCE Why Do LED Lights Flicker & How to Fix It - LED Flickering

Source

LED Flickering LED Flickering LED Flickering LED Flickering LED Flickering LED Flickering LED Flickering LED Flickering LED Flickering

Related Articles


Changing Scene

  • August 27, 2026 - Symmetry Lighting Announces David McCrone as Their New Commercial Sales Manager

    Symmetry Lighting Announces David McCrone as Their New Commercial Sales Manager

    Meet David McCrone, Symmetry Lighting’s new Commercial Sales Manager!⁠ David brings extensive leadership experience in the lighting and electrical industries. His combination of industry expertise and technical knowledge is a valuable asset as they continue to grow and enhance the support they provide to their customers and partners. They are very excited to have him… Read More…

  • August 26, 2026 - Ben Fischer & Andrew Parker Promoted at Salex

    Salex Announces Two New Leadership Updates

    Salex is excited to share two important leadership updates! Ben Fischer, Principal has been appointed Vice President Sales & Strategic Accounts, where he will lead Salex’s overall sales strategy, supporting continued growth across their markets while strengthening their sales teams, key accounts, and manufacturer partnerships. Andrew Parker P.Eng., Principal has been appointed Vice President Technical… Read More…


Design

  • Lumenpulse: Ethernet as a Backbone for Lighting

    Lumenpulse: Ethernet as a Backbone for Lighting

    Ethernet is a high performance and reliable networking technology that has been making inroads into architectural LED lighting applications. Having undergone decades of research and development as a workhorse of the IT industry, Ethernet brings a refined pedigree to a lighting industry which is trending toward highly intelligent light fixtures and services. This article highlights… Read More…

  • LEDVANCE: Four-Inch vs Six-Inch Recessed Lighting – Which Is Better?

    LEDVANCE: Four-Inch vs Six-Inch Recessed Lighting – Which Is Better?

    When you need to add lighting to rooms in your commercial and residential spaces, one of the most popular options today is to install recessed light fixtures. It provides a visually pleasing effect while saving space, especially on ceilings. However, many people are confused about which size is appropriate for their needs. Usually, people hesitate… Read More…


New Products

  • WAGO: Lighting Management Solutions

    WAGO: Lighting Management Solutions

    WAGO Lighting Management is a sophisticated solution for lighting control in large spaces such as production facilities and warehouses. Using a combination of predefined hardware and user-friendly software, WAGO offers a lighting management system that facilitates design and commissioning of new lighting systems while providing numerous additional advantages for their operation. Read More…

  • Leviton – Certolux Visioneering (Viscor): LMNW Series LED Wide Commercial Wrap Luminaire

    Leviton – Certolux Visioneering (Viscor): LMNW Series LED Wide Commercial Wrap Luminaire

    When dependable row mounting performance and broad, uniform illumination are required, the LMNW wide commercial wrap delivers a practical solution for both renovation and new construction projects. Designed as a versatile commercial wrap, LMNW combines a wide footprint with a fully illuminated polycarbonate lens to provide smooth, even light distribution while helping simplify upgrades from… Read More…