LRC Responds to AMA Report on LED Lighting Health Hazards

AMA LRC

 

 

August 08 2016

Recently the American Medical Association (AMA) produced a document cautioning the public about In-Ga-N based LEDs used as sources of illumination. The Lighting Research Center (LRC) at Rensselaer Polytechnic Institute* has received a large number of requests for an opinion. Professors Mark Rea and Mariana Figueiro of the LRC have prepared a response.

Key points include:

• Predictions of health consequences from light exposure depend upon an accurate characterization of the physical stimulus as well as the biological response to that stimulus. Without fully defining both the stimulus and the response, nothing meaningful can be stated about the health effects of any light source.

• Notwithstanding certain sub-populations that deserve special attention, blue light hazard from In-Ga-N LEDs is probably not a concern to the majority of the population in most lighting applications due to human’s natural photophobic response.

• Both disability glare and discomfort glare are mostly determined by the amount and distribution of light entering the eye, not its spectral content.

• In-Ga-N LED sources dominated by short wavelengths have greater potential for suppressing the hormone melatonin at night than sodium-based sources commonly used outdoors. However, the amount and the duration of exposure need to be specified before it can be stated that In-Ga-N LED sources affect melatonin suppression at night.

• Until more is known about the effects of long-wavelength light exposure (amount, spectrum, duration) on circadian disruption, it is inappropriate to single out short-wavelength radiation from In-Ga-N LED sources as a causative factor in modern maladies.

• Correlated color temperature (CCT) is not appropriate for characterizing the potential impacts of a light source on human health because the CCT metric is independent of nearly all of the important factors associated with light exposure, namely, its amount, duration, and timing.

The LRC’s response attempts to draw attention to the problem of misapplying short-hand metrics to the topic of light and health, and also provides the reader with a wealth of references that should inform rational discourse.

Read about the AMA’s Guidance on Harmful Effects of High Intensity Street Lighting: http://lighting.electricalindustry.ca/led-technology/1502-ama-issues-guidance-on-harmful-effects-of-high-intensity-street-lighting.

Image courtesy of tiverylucky at FreeDigitalPhotos.net.

 

* The Lighting Research Center (LRC) at Rensselaer Polytechnic Institute is the world’s leading center for lighting research and education. Established in 1988 by the New York State Energy Research and Development Authority (NYSERDA), the LRC has been pioneering research in solid-state lighting, light and health, transportation lighting and safety, and energy efficiency for nearly 30 years. LRC lighting scientists with multidisciplinary expertise in research, technology, design, and human factors, collaborate with a global network of leading manufacturers and government agencies, developing innovative lighting solutions for projects that range from the Boeing 787 Dreamliner to U.S. Navy submarines to hospital neonatal intensive-care units. With 35 full-time faculty and staff, 15 graduate students, and a 30,000 sq. ft. laboratory space, the LRC is the largest university-based lighting research and education organization in the world.

 

Related Articles


Changing Scene


Design

  • Zaneen: Answering Your LED Questions

    Zaneen: Answering Your LED Questions

    The Zaneen team wanted to take a moment to tell you more about Light Emitting Diodes (LEDs) by answering some common questions. They begin by defining what a LED means and describe a few of its technical details and then look into the importance of LED technology, the advantages of using LEDs, and some must-know… Read More…

  • Lumenpulse: A Look at the Past & Future of LED Binning

    Lumenpulse: A Look at the Past & Future of LED Binning

    In the lighting industry, the act of “binning” of LEDs is the process of sorting LEDs by certain characteristics, such as colour, voltage, and brightness. The ANSI standard C78.377-2017 provides the dimensions and coordinates of the bins that are currently used to standardize the colour points of all white light LEDs. These dimensions are calculated… Read More…


New Products

  • Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco’s BLADE SYSTEMS brings the Light Guide Plate optics behind the BLADE circular family to linear lighting, in the same ultra-slim 3/4″ profile. A micro-dot pattern engraved into optical-grade acrylic converts edge-mounted LED light into smooth, uniform illumination with low glare, achieving UGR below 19 in direct/indirect configurations. Built as a true system, straight… Read More…

  • GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    PS-INF-3.5KW is a state of the art, high power density, outdoor rated power supply designed by GVA Lighting for INFINITY circuits. Accepting a broad range of input voltages and delivering up to 3.5 kW of power from a compact and robust form factor, PS-INF-3.5KW enables circuit lengths upwards of 420 m (1377 ft). Read More…