|

Gescan: STANPRO SLA-2L Series – 36W 6VDC “EASY OUT” Steel Battery Unit

Gescan: STANPRO SLA-2L Series - 36W 6VDC “EASY OUT” Steel Battery Unit

May 14, 2025

SLA-2L Series: Effective Emergency Lighting You Can Count On

The commercial SLA-2L Series features a steel battery unit designed to provide efficient and reliable emergency lighting. Utilizing a sturdy all 18-gauge steel housing, with white powder finish, Stanpro’s series presents a modern and unobtrusive design. Full battery recharge completes in 24 hours for its maintenance free, sealed lead acid battery unit. Brown out circuit monitors flow of AC current and will energize the battery unit with emergency power when reduction in power occurs. CSA certified and meets ICES-005 requirements.

Features

Circuitry

  • 120/347V AC 60Hz input, field selectable
  • High efficacy, rapid recovery, precision control charging system
  • 6 V DC 36 W or 12 V DC 72 W emergency power output versions (as specified)
  • Momentary push button test switch
  • Diagnostic/pilot LED for AC ON and CHARGE
  • Fully automatic, current limiter charger
  • Line latched, low voltage protection
  • Solid state design and construction
  • Short circuit protection
  • Brown out circuit monitors flow of AC current and will energize the battery unit with emergency power when reduction in power occurs
  • Temperature compensated
  • Complete battery recharge in 24 hours
  • Maintenance free, sealed lead acid battery
  • Wire connexions provided for remote load

Mechanical

  • 18-gauge steel construction
  • 120V AC line cord installed
  • Universal spider knockout pattern and keyhole mounting slots stamped into back of cabinet
  • Multiple conduit entry knockouts
  • White powder coat finish
  • PAR18 small style, high impact thermoplastic heads complete with high output optics
  • LED heads with limited lifetime warranty

Approvals

  • CSA Certified to C22.2 #141-15
  • Meets requirements of ICES-005

Specifications

Brand NameStanproItem NameEmergency Light Fixture
Typelead-acid Battery unitHousing ColorWhite
Lamp Wattage2 WFixture Wattage36 W
Lamp Type(2) 2 W PAR18 Not Exchangeable LEDDimensions311.15 mm W x 262.763 mm H
MountingWallHousing MaterialPlastic
Input Voltage120 – 347 V, 6 V BatteryNumber of Lamps2
ApplicationIndoor
  • May 14, 2025 - Gescan_ STANPRO SLA-2L Series - 36W 6VDC “EASY OUT” Steel Battery Unit
  • May 14, 2025 - Gescan_ STANPRO SLA-2L Series - 36W 6VDC “EASY OUT” Steel Battery Unit
May 14, 2025 - Gescan_ STANPRO SLA-2L Series - 36W 6VDC “EASY OUT” Steel Battery Unit

Source

Related Articles

Changing Scene

Design

  • LEDVANCE: Understanding Light Beam Angles

    LEDVANCE: Understanding Light Beam Angles

    Beam angle is important in lighting design. It determines how light spreads within a space and influences both functionality and atmosphere. By understanding beam angles, you can achieve both adequate coverage and visual appeal. This guide explains why beam angle matters, how it affects different types of lighting, where it is applied, and what to… Read More…

  • Canada Light Expo: Energy Efficient Lighting Solutions for Modern Businesses

    Canada Light Expo: Energy Efficient Lighting Solutions for Modern Businesses

    In today’s competitive business landscape, organizations are constantly seeking ways to reduce operational costs, improve sustainability, and foster productive work environments. Among the most impactful yet often overlooked areas of optimization is lighting. As businesses strive to balance profitability with environmental responsibility, energy efficient lighting has emerged as a strategic investment rather than just a utility… Read More…

New Products

  • Eralux: ALPS E3 HYDRO – Backlit Flat Panel

    Eralux: ALPS E3 HYDRO – Backlit Flat Panel

    The ALPS E3 series is a backlit flat panel designed with optimal LED placement to ensure a uniformly lit space. It features a switchable CCT and power driver that allows endless flexibility at the install site, as well as a 125 LPW performance. The additional Level 2 NSF rating of the ALPS E3 HYDRO makes… Read More…

  • Toronto LightWorks: Introducing Optico Neon 3D by LEDFlex Group

    Toronto LightWorks: Introducing Optico Neon 3D by LEDFlex Group

    Designed to deliver precise, uniform illumination across curved surfaces, Optico Neon 3D combines advanced dual-bending technology with integrated optics for exceptional architectural flexibility. Available in a range of colour temperatures, RGB, RGBW, and pixel-controlled options, it empowers designers to create striking visual experiences while maintaining exceptional light control. With an IP67-rated silicone-encapsulated construction and anti-glare… Read More…