EarthTronics Introduces Vapor Tight LED Series With Sensor To Offer Low-Cost Energy Solution for Wet, Dusty and Dirty Environments

LDS NP 12 EarthTronics 400

June 13, 2019

EarthTronics, dedicated to developing innovative energy-efficient lighting products that provide a positive economic and environmental impact, introduces its new line of IP65 wet location rated Vapor Tight LEDs with an integral microwave sensor to provide a low-cost solution for lighting parking garages, cold storage, walkways, stairwells, under canopy, exterior retail and other wet, dusty and dirty environments.

The 48-inch long, Vapor Tight LEDs with the integral microwave sensor from EarthTronics are available in 30 and 40 watts, producing 4200 and 5600 lumens with a 150° beam angle. Both units feature a 5000K color temperature with a high 80+ CRI. They have a 0-10 volt dimming standard and will perform in temperatures ranging from -20°F to 122°F.

The integral microwave sensor allows for setting the area of detection, stand-by time, hold time and dimming. The added ability of day light sensing and dimming enables this product to meet certain local energy codes, as well as save up to 60 percent energy and extend the performance life of the fixture.

The Vapor Tight LEDs feature a fully gasket polycarbonate housing, which provides the IP66 wet location rating for wash down and dusty conditions. The enclosure is easy to install, as well as easy to service and clean. These fixtures can be ordered with or without the internal micro-wave sensor.

These new Vapor Tight LED Series from EarthTronics is Design Light Consortium (DLC) and UL listed with a 50,000 hour performance life. They may be accepted for utility rebates in many markets. Rebates can easily be found through EarthTronics website at Rebate Finder – EarthTronics.

For more information about all EarthTronics products, visit www.earthtronics.com.

Related Articles


Changing Scene


Design

  • Zaneen: Answering Your LED Questions

    Zaneen: Answering Your LED Questions

    The Zaneen team wanted to take a moment to tell you more about Light Emitting Diodes (LEDs) by answering some common questions. They begin by defining what a LED means and describe a few of its technical details and then look into the importance of LED technology, the advantages of using LEDs, and some must-know… Read More…

  • Lumenpulse: A Look at the Past & Future of LED Binning

    Lumenpulse: A Look at the Past & Future of LED Binning

    In the lighting industry, the act of “binning” of LEDs is the process of sorting LEDs by certain characteristics, such as colour, voltage, and brightness. The ANSI standard C78.377-2017 provides the dimensions and coordinates of the bins that are currently used to standardize the colour points of all white light LEDs. These dimensions are calculated… Read More…


New Products

  • Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco’s BLADE SYSTEMS brings the Light Guide Plate optics behind the BLADE circular family to linear lighting, in the same ultra-slim 3/4″ profile. A micro-dot pattern engraved into optical-grade acrylic converts edge-mounted LED light into smooth, uniform illumination with low glare, achieving UGR below 19 in direct/indirect configurations. Built as a true system, straight… Read More…

  • GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    PS-INF-3.5KW is a state of the art, high power density, outdoor rated power supply designed by GVA Lighting for INFINITY circuits. Accepting a broad range of input voltages and delivering up to 3.5 kW of power from a compact and robust form factor, PS-INF-3.5KW enables circuit lengths upwards of 420 m (1377 ft). Read More…