LED lights Canada Lotus Directional 2 Inch LED Pot Lights

LED Lights Canada

October 23, 2017

No need for a pot can to install this 2 inch directional LED pot light. Use these petite “eyeball” lights to create interest in alcoves, bookshelves, built-in shelving units or areas where more light is desired. Imagine having a light above the kitchen sink that is inconspicuous and aimed exactly where you need it. Add these to highlight your favourite piece of artwork. Create more light in the area below a vaulted ceiling without having the light off-centre.

Since they do not generate much heat, this gimbal light and its driver carry an IC rating to be installed against insulation or anything flammable. Like many of the other Lotus models there is a dimmable driver included along with each light that connects directly to line voltage. If the driver is installed beside the light, 5 inches of clearance are required. With the driver located away from the light using an extension cable the light requires only 1.5 inches clearance. Being third party tested for operation in various temperatures, these are rated to work down to -40 degrees Celsius. This feature makes them perfect for all sorts of outdoor conditions as well.

You can customize your light colour temperature and colour of trim to match the styling of your space. Available in white, black and brushed nickel trims with a light temperature choice of 3000K or 4100K.

For more information:

http://www.ledlightscanada.com/Lotus-Directional-2-inch-LED-Pot-Lights-p/pot2500.htm

 

Related Articles


Changing Scene


Design

  • Zaneen: Answering Your LED Questions

    Zaneen: Answering Your LED Questions

    The Zaneen team wanted to take a moment to tell you more about Light Emitting Diodes (LEDs) by answering some common questions. They begin by defining what a LED means and describe a few of its technical details and then look into the importance of LED technology, the advantages of using LEDs, and some must-know… Read More…

  • Lumenpulse: A Look at the Past & Future of LED Binning

    Lumenpulse: A Look at the Past & Future of LED Binning

    In the lighting industry, the act of “binning” of LEDs is the process of sorting LEDs by certain characteristics, such as colour, voltage, and brightness. The ANSI standard C78.377-2017 provides the dimensions and coordinates of the bins that are currently used to standardize the colour points of all white light LEDs. These dimensions are calculated… Read More…


New Products

  • Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco’s BLADE SYSTEMS brings the Light Guide Plate optics behind the BLADE circular family to linear lighting, in the same ultra-slim 3/4″ profile. A micro-dot pattern engraved into optical-grade acrylic converts edge-mounted LED light into smooth, uniform illumination with low glare, achieving UGR below 19 in direct/indirect configurations. Built as a true system, straight… Read More…

  • GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    PS-INF-3.5KW is a state of the art, high power density, outdoor rated power supply designed by GVA Lighting for INFINITY circuits. Accepting a broad range of input voltages and delivering up to 3.5 kW of power from a compact and robust form factor, PS-INF-3.5KW enables circuit lengths upwards of 420 m (1377 ft). Read More…