ABB Emergi-Lite: Mini-Inverter Series - Emergency Lighting Power Supply
| |

ABB Emergi-Lite: Mini-Inverter Series – Emergency Lighting Power Supply

The Mini-Inverter is a cUL Listed stand-alone pure sine wave output inverter designed to provide power to designated emergency lighting fixtures. In a power loss situation, it will supply power from the onboard battery supply. The Mini-Inverter works in conjunction with incandescent, LED, and fluorescent fixture types and will automatically run switched, normally-on, or normally-off designated emergency fixtures. The Mini-Inverter is ideal for applications requiring an emergency source for lighting arrangements that utilize multiple lamp and fixture types and is available in surface mount and comes with a one-year warranty and nine-year pro-rata battery warranty.

JDRF Electromag: Autonomy Sensor - Smart Lighting
| |

JDRF Electromag: Autonomy Sensor – Smart Lighting

The Autonomy Sensor is an integrated control and management device that self-organizes, configures, and optimizes an advanced Smart Lighting System. A set of Autonomy Sensors collaborate to provision a secure wireless mesh network, establish Area membership based on physical co-location, and configure motion and daylight groups through the analysis of motion patterns and daylight distribution levels, respectively. No setup or human supervision is required.

Beluce: Centro - Smart Technology / Emergency Lighting
| |

BeLuce: Centro System – Smart Technology / Emergency Lighting

BeLuce’s Centro system is an all-in-one solution, especially when reliability is the most important feature of any emergency power source. Without it, all other features and benefits are meaningless. Fortunately, there is now an innovative and reliable solution that greatly simplifies the installation process and considerably reduces the cost of material, labour, monitoring and maintenance. Normally on signs and normally off remotes must operate independently on the building’s power during a power failure. It thus requires two different cables to connect the emergency fixtures. A third wire is essential to allow communication
between the units. It, therefore, generates important material and labour costs, especially for large/vast buildings where running thousands of feet of wires are needed. The Centro system is the perfect solution to reduce those costs because it only involves a single cable instead of three. The Centro drivers within each unit will determine what is normally off or normally on in the circuit. It also permits communication between the units and the Centro Software.

LEDVANCE Expands Innovative OPTI SELECT Product Platform
| |

LEDVANCE Expands Innovative OPTI-SELECT Series Product Platform

LEDVANCE is expanding their OPTI-SELECT series product platform, reinforcing their commitment to flexibility, efficiency, and performance. The expanded lineup now includes a comprehensive range of indoor and outdoor lighting solutions, allowing users to adjust beam angles, color temperatures, and lumen outputs with the twist of a switch or the turn of a wrist—all without replacing lenses or reflectors. With OPTI-SELECT technology, lighting professionals can customize distribution patterns on-site, eliminating the hassle of multiple SKUs while enhancing installation speed, performance, and energy efficiency. This latest expansion includes Bollards, Cylinders, Floodlights, Track Lights, and PAR38 lamps, making one product adaptable to multiple applications.

LEDVANCE UFO Lights - What You Need to Know for Efficient Illumination
| |

LEDVANCE: UFO Lights – What You Need to Know for Efficient Illumination

UFO lights are LED fixtures shaped like UFOs, offering efficient lighting for large spaces. Due to their design, UFO lights cover a broader area and are ideal for places with high ceilings. The LED technology ensures that these lights consume less energy and last much longer than traditional lighting options. High Bay UFO Lights: These lights are designed for ceilings that are 20 to 40 feet high. They are typically used in large commercial spaces like warehouses, gymnasiums, and train stations. Low Bay UFO Lights: These are intended for ceilings ranging from 12 to 20 feet high. Low bay UFO lights are perfect for smaller spaces such as retail stores, restaurants, and offices. Choosing the right type of UFO light is crucial for ensuring the proper brightness and light distribution. Installing a high bay light in a room with a lower ceiling (e.g., 12 feet) will result in excessive brightness, while a low bay light may not provide sufficient illumination for higher ceilings.

Cooper-Lighting-Connected-Network-Lighting-Control
|

Cooper Lighting Solutions: Improving Efficiency in Lighting for Municipalities & Utilities

Explore the efficiency benefits of connected network lighting control. Municipalities and the utilities that serve their residents are tasked with managing significant lighting-related costs for the installation, maintenance, and powering of streetlights and other infrastructure lighting. So, improving efficiencies in infrastructure lighting and operation may result in considerable savings. That’s where connected network lighting control comes in. The addition of network lighting controls allows for proactive management of lighting inventory and improved operation and maintenance of infrastructure lighting. Users have full view of system-level performance – including fault detection – right from their remote device. A CMS (Central Management System) dashboard lets users check, troubleshoot, and diagnose the operational status of every light fixture in the system, and it automatically provides fault detection and flags recommended maintenance which in turn streamlines workflow and ultimately results in fewer trips to the light pole.

Hybrid Lighting Controls - A Symphony of Wired & Wireless Technologies
|

Cooper Lighting Solutions: Hybrid Lighting Controls – A Symphony of Wired & Wireless Technologies

The world of lighting control has entered a new era, blending the strengths of wired and wireless technologies into hybrid solutions. This approach delivers unmatched flexibility, energy efficiency, scalability, and ease of maintenance—meeting the diverse needs of modern buildings and their occupants. But what exactly is hybrid lighting control, and why is it gaining traction in the industry? At its core, hybrid systems allow seamless integration of different communication protocols and device types within a single lighting control ecosystem. Combining the reliability of wired systems with the adaptability of wireless systems, this synergy allows lighting designers, electrical contractors, and building managers to optimize each project by choosing the best technology for each specific application.

Salex: Clear Blue Technologies Illumient Solar Streetlights & Smart Off-Grid Technology
| |

Salex: Clear Blue Technologies Illumient Solar Streetlights & Smart Off-Grid Technology

Clear Blue Technologies’ Illumient Smart Off-Grid lighting solutions deliver the lowest cost of ownership and impressive performance within the industry. Smart Off-Grid software enables the lights to be monitored, controlled and proactively maintained in the cloud, delivering proven reliability and long-lasting system performance. Cut maintenance costs by 80% with Smart Off-Grid Technology. Cost Effective, Highest Light Efficiency: A complete solution that is energy efficient, easy to install and beautiful. Illumient provides a complete solution – poles, lights, arms, solar panels, wind turbines, cabling, controllers, and batteries along with 24×7 monitoring & maintenance. Cloud Management & Control: With Illumience, the cloud-based software that provides 24×7 remote monitoring, management, and proactive servicing, Illumient lights, security systems, and IoT devices can achieve excellent reliability and performance, while dramatically reducing costs. Proven Reliability: Illumient is proven in the field, with lighting installations across North America as well as Smart Off-Grid in 37 countries across the globe, in extreme weather environments, and both urban and rural landscapes.

How Technology is Reshaping Lighting Design - Augmented Reality, Sustainability, Smart Lighting, & 3D Printing
| | |

Cooper Lighting Solutions: How Technology is Reshaping Lighting Design – Augmented Reality, Sustainability, Smart Lighting, & 3D Printing

Technology is rapidly reshaping the lighting design industry, offering new ways to streamline workflows, enhance aesthetics, and optimize energy efficiency. In 2025, lighting professionals will have more tools than ever to balance creativity, functionality, budgets, and project timelines. Among the most exciting advancements are augmented reality (AR) applications, which address common design challenges by bringing visualization and precision to the forefront. Alongside AR, other transformative trends – including sustainable lighting solutions, smart lighting systems, and 3D printing – are redefining the possibilities for lighting design.

Arkalumen: ORB3 & ORB5 LED Drivers
| |

Arkalumen: ORB3 & ORB5 LED Drivers

The ORB family of LED drivers innovatively integrate intelligent tunable spectra control features into an incredibly modular Zhaga based form factor, 50mm in diameter, 8mm high. Each unit is a multi-channel constant current driver with up to 5 precisely controlled output channels, a holder for one of many different tunable white or tunable color LED arrays, and a platform for mounting various TIR optics and reflectors.

Lumenpulse Lumencore Linear Cove Colour Changing
|

Lumenpulse: Lumencore Linear Cove Colour Changing

The Lumencore Linear Cove Colour Changing fixture offers a dynamic and flexible lighting solution, perfect for enhancing architectural spaces with vibrant colours and ambient illumination. Leveraging advanced Optidrive technology, this luminaire enables seamless colour transitions and an extensive palette of hues, allowing designers to craft unique atmospheres tailored to any occasion. With high lumen output and precise optics, the Lumencore Linear Cove ensures consistent, high-quality performance while integrating smoothly into cove applications. Its sleek design enhances the aesthetics of any environment, making it ideal for both accent and indirect lighting. Elevate your space with captivating colour and sophisticated ambiance with this innovative lighting solution.

Cooper Lighting Solutions: Halo - 830S Sustainable LED Track Luminaire
|

Cooper Lighting Solutions: Halo – 830S Sustainable LED Track Luminaire

The HALO 830S is where sustainability meets style. This track fixture is manufactured using proprietary 3D printing technology. The result is an environmentally friendly, low-glare, and energy-efficient 3” track light in a designer’s palette of 22 unique colors. This approach provides benefits over traditional manufacturing, such as shorter lead times thanks to faster production and on-demand printing. Choose the HALO 830S Track Head for a sustainable lighting solution that is sure to impress.

Legrand: Wattstopper PLUS - Networked Lighting Controls Solution
| |

Legrand: Wattstopper PLUS – Networked Lighting Controls Solution

Wattstopper PLUS is the next step in intelligent lighting control systems that combines Legrand’s engineering experience with Encelium Technology to create a smarter, people-centric solution. Powered by Encelium Technology, it offers wireless, wired and hybrid systems that are simple to specify, install, use, and manage. It empowers you to accomplish more, seize new opportunities, and build smarter, more efficient environments.

Magic Lite: 8 Zone RGB+CCT Wall Panel Remote 
|

Magic Lite: 8 Zone RGB+CCT Wall Panel Remote 

The Magic Lite 8-Zone RGB+CCT Wall Panel Remote offers reliable wireless control for multi-zone LED lighting systems. Designed with a high-precision capacitive touch IC and utilizing 2.4GHz RF wireless technology, it provides smooth and responsive adjustments for up to 8 lighting zones. Control 16 million colours, fine-tune saturation, colour temperature, and brightness, all from a sleek, compact wall panel.

Hybrid Lighting Controls - A Symphony of Wired & Wireless Technologies
|

Intro to LLLCs: Luminaire Level Lighting Controls

LLLC stands for Luminaire Level Lighting Controls. LLLCs are a trend in commercial lighting that can improve occupant comfort and space utilization. Specifically, LLLCs combine LEDs, controls, connectivity, and data to create a flexible lighting system. Often built into LLLCs are controls strategies such as occupancy sensing, daylight harvesting, continuous dimming, and more. LLLCs are the fastest-growing controls option in indoor lighting as a whole. And they’re tracking in the commercial market segment, especially for mid- to small-size buildings.