May 16: ANSI/IES Webinar — Practice for Design and Maintenance of Roadway and Parking Facility Lighting

May 1, 2019

As part of IES’ monthly educational webinar series, ANSI/IES RP-8-18 Committee members Don MacLean and Paul Lutkevich will introduce the new standard in standards, Recommended Practice for Design and Maintenance of Roadway and Parking Facility Lighting. 

This ambitious and accomplished endeavour puts all of a number of previous standards regarding roadway lighting into one comprehensive tome. 

Items to be covered would include:

  • Part 1 – Fundamentals
  • Chapter 1: Introduction to Roadway Lighting
  • Chapter 2: Vision and Fundamental Concepts
  • Chapter 3: Calculations
  • Chapter 4: Obtrusive Light
  • Chapter 5: The Planning and Design Process
  • Chapter 6: System Components
  • Chapter 7: Standards and Codes
  • Chapter 8: Computer Applications
  • Chapter 9: Maintenance and Operations
  • Part 2 – Design
  • Chapter 10: Highway and Interchange Lighting
  • Chapter 11: Street Lighting
  • Chapter 12: Intersections, Roundabouts and Crosswalks
  • Chapter 13: At-Grade Railway Crossings
  • Chapter 14: Tunnels
  • Chapter 15: Toll Plazas
  • Chapter 16: Off-Roadway Facilities
  • Chapter 17: Parking Lots and Parking Garages
  • Chapter 18: Roadway Sign Lighting
  • Chapter 19: Temporary and Work Zone Lighting

Webinar participants are eligible for one (1) IES Continuing Education Unit (CEU).

Find out more: www.ies.org/education/webinars/?utm_source=IES&utm_medium=Email&utm_campaign=Client Updates.

Related Articles

Changing Scene

Design

  • Zaneen: Answering Your LED Questions

    Zaneen: Answering Your LED Questions

    The Zaneen team wanted to take a moment to tell you more about Light Emitting Diodes (LEDs) by answering some common questions. They begin by defining what a LED means and describe a few of its technical details and then look into the importance of LED technology, the advantages of using LEDs, and some must-know… Read More…

  • Lumenpulse: A Look at the Past & Future of LED Binning

    Lumenpulse: A Look at the Past & Future of LED Binning

    In the lighting industry, the act of “binning” of LEDs is the process of sorting LEDs by certain characteristics, such as colour, voltage, and brightness. The ANSI standard C78.377-2017 provides the dimensions and coordinates of the bins that are currently used to standardize the colour points of all white light LEDs. These dimensions are calculated… Read More…

New Products

  • Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco’s BLADE SYSTEMS brings the Light Guide Plate optics behind the BLADE circular family to linear lighting, in the same ultra-slim 3/4″ profile. A micro-dot pattern engraved into optical-grade acrylic converts edge-mounted LED light into smooth, uniform illumination with low glare, achieving UGR below 19 in direct/indirect configurations. Built as a true system, straight… Read More…

  • GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    PS-INF-3.5KW is a state of the art, high power density, outdoor rated power supply designed by GVA Lighting for INFINITY circuits. Accepting a broad range of input voltages and delivering up to 3.5 kW of power from a compact and robust form factor, PS-INF-3.5KW enables circuit lengths upwards of 420 m (1377 ft). Read More…