How the Right Lighting Could Save the Mona Lisa

July 22, 2019

Dorukalp Durmus 

Next time you’re in a museum or art gallery, observe each painting a little more closely. You may notice cracks on the surface of the canvas, especially if the painting is very old.

The damage you see is caused by radiant energy striking the painting’s surface — and light (visible radiation) causes irreversible damage to artwork.

However, all is not lost. Our new research shows that optimized smart lighting systems can reduce damage to paintings while preserving their colour appearance.

The dilemma

Damage to artwork by infrared, ultraviolet and visible radiation is well documented. When a photon (an elementary light particle) is absorbed by a pigment in paint, the pigment molecule elevates to a higher energy state. In this excited state, the molecule’s chemical composition changes. This is called a photochemical action. 

Viewed from the human perspective, the photochemical action manifests itself as cracks, discolouration, or surface hardening.

Not surprisingly, daylight, which includes infrared and ultraviolet radiation, is highly damaging to paintings. In museums, it is common practice to use incandescent, and more recently, LEDs, to reduce damage. 

However, a group of researchers showed that light can cause colour degradation regardless of the lighting technology. Bright yellow colours in Van Gogh’s famous Sunflowers are turning dark brown due to absorption of blue and green light from LEDs. Research on the conservation of artwork makes it look like this is a losing battle. 

Of course, you will be right in thinking that the best conservation method would be the complete absence of light. But we need light for visibility and to appreciate the beauty of a painting. This leaves us with a dilemma of two conflicting parameters: visibility and damage.

Light optimization

Lighting technology in itself may not be enough to tackle this dilemma. However, the way we use technology can make a difference. 

Our approach to address this problem is based on three key facts: 

  1. light triggers photochemical actions only when it is absorbed by a pigment
  2. the reflectance factor of a pigment (its effectiveness in reflecting light) determines the amount of light absorption
  3. light output (composition of the light spectrum, and the intensity of the light) of lighting devices, such as LEDs, can be fine-tuned.

It is possible to measure the reflectance factor of a painting and optimize lighting to reduce absorption. Previous research shows that optimizing light to lessen absorption can reduce energy consumption significantly, and with no loss in visual experience. Objects look equally natural and attractive under optimized light sources compared to regular white light sources. 

In this new study, we optimized LEDs for five paintings to reduce light absorption. Using a genetic algorithm (an artificial intelligence technique), we reduced light absorption between 19% and 47%. Besides the benefits for the painting, this method almost halved the energy consumed by lighting. 

In addition to increased sustainability and art conservation, the colour quality of the paintings was another parameter in our optimization process. Colour appearance and brightness of paintings were held constant not to lower the appreciation of the artwork.

This is possible due to a quirk in our visual system. Photoreceptor cone cells, the cells in our retinas that enable human colour vision, are not equally sensitive to the whole visible spectrum. 

Different combinations of wavelength and intensity can result in identical signals in our brain. This understanding gives us the flexibility of using different light sources to facilitate identical colour appearances. 

This smart lighting system requires scanning of the artwork to obtain colour information. Then, a precise projection system emits optimized lighting to the painting. 

This method offers a solution to extend the lifetime of works of art, such as the world-famous Mona Lisa, without leaving them in the dark.

Dorukalp Durmus is an Honorary Associate, University of Sydney. This article was first published online by the University of Sydney: theconversation.com/how-the-right-lighting-could-save-the-mona-lisa-95938. It has been lightly edited.

Photo source: Juan Di Nella on Unsplash

Related Articles


Changing Scene

  • Sept 9, 2026 - Leviton Canada Appoints Salex as Network Solutions Sales Agency for Ontario

    Leviton Canada Appoints Salex as Network Solutions Sales Agency for Ontario

    Leviton Canada is pleased to announce the appointment of Salex Inc. as their authorized sales agent for the Network Solutions (NS) product portfolio across the Ontario market, effective immediately. This appointment reflects their commitment to strengthening customer engagement, expanding market coverage, and providing enhanced local support throughout the province.  Salex brings a highly experienced team,… Read More…

  • August 27, 2026 - Symmetry Lighting Announces David McCrone as Their New Commercial Sales Manager

    Symmetry Lighting Announces David McCrone as Their New Commercial Sales Manager

    Meet David McCrone, Symmetry Lighting’s new Commercial Sales Manager!⁠ David brings extensive leadership experience in the lighting and electrical industries. His combination of industry expertise and technical knowledge is a valuable asset as they continue to grow and enhance the support they provide to their customers and partners. They are very excited to have him… Read More…


Design

  • CSC LED: Spotted On Site – Cambridge Centre Mall Lighting Retrofit

    CSC LED: Spotted On Site – Cambridge Centre Mall Lighting Retrofit

    A recent lighting retrofit at Cambridge Centre Mall in Cambridge, Ontario demonstrates how the right LED solution can improve performance, simplify installation, and keep a project on budget. Working with Conestogo Electric Ltd., the project replaced outdated metal halide fixtures throughout the mall’s parking lot with CSC LED FL05 Area Lights mounted on the existing poles using… Read More…

  • Canada Light Expo: Architectural Lighting Trends Transforming Modern Buildings

    Canada Light Expo: Architectural Lighting Trends Transforming Modern Buildings

    Modern buildings are not just about how they’re built or what they are made of anymore. Lighting is a part of how a building works, and it makes people feel. This is true for offices, hotels, stores, hospitals, homes, and public buildings. The way a building is lit can affect how comfortable it is to… Read More…


New Products

  • Eureka Re-Thinks Mika Family

    Eureka Re-Thinks Mika Family

    Eureka has announced an expansion of its popular Mika family. The globe luminaire has a new size, enhanced output, and a range of accessories, including RGBW illumination—Mika Colors and Mika Gradient, and decorative shades—Mika Flare. Eureka has updated the Mika sphere to increase lumen output across the collection by 140% so at its highest, Mika… Read More…

  • LEDVANCE: XtremeZone Panel Hazardous Location Luminaire

    LEDVANCE: XtremeZone Panel Hazardous Location Luminaire

    When the location is hazardous, ordinary lighting is off the table. The LEDVANCE XtremeZone Panel Hazardous Location luminaire is built for industrial environments where protection, reliability and installation flexibility are part of the spec. Designed for hazardous. Built for Xtreme. Read More…