|

ABB Emergi-Lite: JMC Series – Steel, Compact, 6V & 12V

Aug 8, 2025 - ABB Emergi-Lite JMC Series - Steel, Compact, 6V & 12V 2

August 8, 2025

JMC Series: A Compact, Robust & Efficient Emergency Lighting Solution

ABB Emergi-Lite’s JMC Series battery unit’s emergency lighting system shall consist of fully automatic equipment with two emergency lighting heads. The unit shall be rated V with a capacity of W for 30 minutes of emergency operation. The charger shall be factory set with a charging voltage tolerance of ± 1% to enable a longer battery life. The emergency light heads shall require no tools for adjusting or aiming. The metal cabinet shall be made of steel with anti-corrosion undercoating.

The JMC Series unit is equipped with the auto-test micro-controller board shall self-test 1 minute every 30 days, 10 minutes every 6 months and 30 minutes every 12 months. The unit shall be supplied with a test switch and diagnostic LED indicator lights to continuously monitor the status of the unit: Battery Failure, Battery Disconnect, Charger Failure, Lamp Failure, Service Alarm, Main Voltage AC “ON”, Charger High Rate.

Features

  • Compact steel cabinet with corrosion-resistant undercoating
  • Quick and easy installation – pre-assembled cordset, no batteries or board to remove before installation
  • Universal Spider knockout pattern for junction box mounting
  • Fully automatic solid-state charger with test switch and AC-on pilot light
  • Sealed dust-proof transfer relay circuit and low-voltage disconnect
  • Long-life, maintenance-free sealed
  • Heads require no tools for orientation
  • Standard input 120 VAC with line cord installed
  • 120/347 VAC without line cord
  • Certified CSA C22.2 No.141-15
Aug 8, 2025 - ABB Emergi-Lite JMC Series - Steel, Compact, 6V & 12V

Source

Related Articles

Changing Scene

Design

  • Zaneen: Answering Your LED Questions

    Zaneen: Answering Your LED Questions

    The Zaneen team wanted to take a moment to tell you more about Light Emitting Diodes (LEDs) by answering some common questions. They begin by defining what a LED means and describe a few of its technical details and then look into the importance of LED technology, the advantages of using LEDs, and some must-know… Read More…

  • Lumenpulse: A Look at the Past & Future of LED Binning

    Lumenpulse: A Look at the Past & Future of LED Binning

    In the lighting industry, the act of “binning” of LEDs is the process of sorting LEDs by certain characteristics, such as colour, voltage, and brightness. The ANSI standard C78.377-2017 provides the dimensions and coordinates of the bins that are currently used to standardize the colour points of all white light LEDs. These dimensions are calculated… Read More…

New Products

  • Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco’s BLADE SYSTEMS brings the Light Guide Plate optics behind the BLADE circular family to linear lighting, in the same ultra-slim 3/4″ profile. A micro-dot pattern engraved into optical-grade acrylic converts edge-mounted LED light into smooth, uniform illumination with low glare, achieving UGR below 19 in direct/indirect configurations. Built as a true system, straight… Read More…

  • GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    PS-INF-3.5KW is a state of the art, high power density, outdoor rated power supply designed by GVA Lighting for INFINITY circuits. Accepting a broad range of input voltages and delivering up to 3.5 kW of power from a compact and robust form factor, PS-INF-3.5KW enables circuit lengths upwards of 420 m (1377 ft). Read More…