IESNA Illumination Awards: Toronto Team Recognized for Two Projects

May 10, 2017

The Illuminating Engineering Society Illumination Awards are an annual recognition of creativity, originality, and professionalism in lighting design. This year, the Smith + Andersen Toronto Lighting Team received two Section Awards for two projects: 619/621 Queen West façade lighting, and the One Queen East lobby lighting.

619/621 Queen West façade lighting

Architect: Quadrangle Architects. Façade Lighting Design: Smith + Andersen, led by Rafael Correa.
In 2014, Hullmark began work on a new mixed-use building in one of Toronto’s most prestigious neighbourhoods — Queen West. Located on Queen just east of Bathurst Street, this new development would not only replace the previous historical structure (which was destroyed by a fire in 2008), but would also become the developer’s head office.

From the beginning, the Queen West location presented unique historical requirements for the design team, who were tasked with creating a method for a new building to blend seamlessly in such a well-established neighbourhood. In order to achieve this, Quadrangle proposed a custom, perforated metal façade solution which would “float”’ in front of the building. This façade provided a unique opportunity for the design team to provide an impactful lighting solution that would deliver a “glowing” effect at the second and third levels. However, due to the tight spacing between the overhanging metal façade and the glazing envelope, it was clear that any exterior lighting fixtures would be too difficult to maintain. Instead, our team designed an interior lighting solution that would preserve the design intent of the façade.

To achieve a visible glow, LED linear luminaires had to be carefully placed between the HVAC system and the glazing at a precise height. Too high, and they would sit above the HVAC diffuser and glare off the windows at office employees inside. Too low, and they would be blocked by the perforated structure outside, eliminating the effect entirely. To get around this, custom telescopic brackets were created which would enable the suspension of fixtures to the correct height, floating above the façade structure outside, but still below the HVAC diffuser inside. This invisible solution had a highly visible, dramatic effect on the final design of this mixed-use building.

One Queen East lobby lighting

Architect: Building Arts Architects and WZMH Architects. Lighting Design: Smith + Andersen, led by Rafael Correa.

How do you re-light a landmark? That’s the question that our team was faced with at One Queen East — an innovative redevelopment project for 20 Vic Management. Bounded by Yonge, Victoria, Richmond, and Queen streets in the heart of downtown Toronto, this office block conjoins a 27-storey office tower, circa 1984, and an historically designated building built in 1892. Last year, the owner began a base building modernization program to meet the requirements of a contemporary, downtown office building. One Queen East features a heavily trafficked office lobby connected to both the Queen Subway Station and PATH, necessitating the creation of a brighter, more welcoming space.

Replacing all existing lighting with dimmable LED luminaires enabled our team to significantly increase the amount of lobby lighting while still providing substantial energy savings. These LEDs have refreshed the lobby space with crisp, consistent lighting through a variety of aesthetically pleasing design solutions.

A 50-foot feature wall on both the east and west sides of the elevator core provides a clean, vertical sheet of light softened by horizontal wooden slats. Since easy maintenance was important to the client, our team designed a custom pulley system located in a crawl space above each feature wall. LED boards are segmented to behave like a chain, and can be lowered from above to their precise location. On the mezzanine, a cube-like LED storage enclosure and a lit horizontal partition echo the dramatic effect of the feature walls. These strong features are offset by more delicate lighting details in other areas across the lobby, such as the linear recessed lighting embedded in the marble walls beside the elevators.
Balancing the heritage of the existing building with modern design solutions, Smith + Andersen’s lighting design transformed the One Queen East lobby into a welcoming space for both tenants and the public.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source: Smith + Andersen, http://smithandandersen.com/node/178.

 

Related Articles


Changing Scene

  • Shine Bright: Call for Speakers Now Open for LEDucation 2025

    LEDucation announces a call for speakers for the 2025 Conference to be held March 18-19 at the New York Hilton Midtown in New York City. Virtual sessions will be offered the prior week, Thursday, March 13th and Friday, March 14th. LEDucation seeks dynamic and engaging speakers who will bring their expertise and unique perspectives particularly… Read More…

  • The DLC’s New Working Group to Collaborate and Advise on Horticultural Lighting Controls

    May 14, 2024 Lighting and controls manufacturers, engineering and design consultants, non-profits, researchers, and indoor cultivators are among stakeholders recently appointed help the DLC accelerate the horticultural lighting industry’s adoption of networked lighting solutions that advance both crop production and energy efficiency. “The controlled environment agriculture industry has grown steadily since the DLC created its… Read More…


Design


New Products

  • Introducing MaxLite’s LS3 Series: Controls-Ready LED Strip Lighting

    May 10, 2024 The new generation of LS Series Linear Strips (LS3 Series) features field-selectable wattages, CCTs and field-installable controls. Offered in three sizes (2′, 4′ and 8′), with each providing nine combinations of colour temperatures and wattages, as well as optional c-Max controls, one product can replace 27 different SKUs for stocking distributors! With… Read More…

  • Discover the Power of SATCO|NUVO’s Hi-Pro A21 High Lumen Lamps

    May 10, 2024 SATCO|NUVO’s LED Hi-Pro A21 Lamps offer ColorQuick convenience ideal for commercial projects. Choose from 2700K/4000K/5000K colour temperatures at installation to achieve the desired atmosphere for the environment. Designed to work in 120V to 277V fixtures, these lamps are compatible with ballast bypass fixtures and are dimmable when used in 120V applications. With… Read More…