UL Forms Task Group to Develop Circadian Lighting Recommended Practice

May 7, 2018

Craig DiLouie

Underwriters Laboratories Inc. (UL) has launched an initiative to develop a recommended practice for the specification, measurement, and application of lighting to support circadian entrainment of individuals in daytime work environments, according to a press release from the Lighting Research Center (LRC) at Rensselaer Polytechnic Institute.

The task group, chaired by Mark S. Rea, Professor of Architecture and Cognitive Sciences at the LRC, will produce a set of practical recommendations and methods, grounded in science, that can be broadly implemented by addressing how to specify lighting for daytime applications, how to accurately measure circadian light, and how specification can be achieved, not only through the use of ceiling fixtures, but also by windows, skylights, luminous panels, and plug-in lighting.

“Our goal is to investigate all aspects of the recommendations to ensure that the science is correct, to confirm that the methods of implementation can be accurately yet broadly applied, and to inspire a positive change in lighting practice,” said Dr. Rea. “Lighting isn’t just for vision anymore. It’s high time we had a valid, agreed-upon metric and some basic guidelines so that healthy lighting can be effectively delivered to benefit society.”

The task group will seek input from design professionals, manufacturers, facility owners, and scientists, review proposals being considered, vote on the technical merits of each recommendation, and draft the recommended practice. The target date for publication of the recommended practice is May 2019.


Craig DiLouie, LC, is Education Director for the Lighting Controls Association. Reprinted with permission of the Lighting Controls Association, www.lightingcontrolsassociation.org.

Related Articles


Changing Scene


Design

  • Zaneen: Answering Your LED Questions

    Zaneen: Answering Your LED Questions

    The Zaneen team wanted to take a moment to tell you more about Light Emitting Diodes (LEDs) by answering some common questions. They begin by defining what a LED means and describe a few of its technical details and then look into the importance of LED technology, the advantages of using LEDs, and some must-know… Read More…

  • Lumenpulse: A Look at the Past & Future of LED Binning

    Lumenpulse: A Look at the Past & Future of LED Binning

    In the lighting industry, the act of “binning” of LEDs is the process of sorting LEDs by certain characteristics, such as colour, voltage, and brightness. The ANSI standard C78.377-2017 provides the dimensions and coordinates of the bins that are currently used to standardize the colour points of all white light LEDs. These dimensions are calculated… Read More…


New Products

  • Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco: BLADE SYSTEMS – Suspended Linear Lighting

    Beta Calco’s BLADE SYSTEMS brings the Light Guide Plate optics behind the BLADE circular family to linear lighting, in the same ultra-slim 3/4″ profile. A micro-dot pattern engraved into optical-grade acrylic converts edge-mounted LED light into smooth, uniform illumination with low glare, achieving UGR below 19 in direct/indirect configurations. Built as a true system, straight… Read More…

  • GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    GVA Lighting: PS-INF-3.5KW – Outdoor Power Supply for Infinity Lighting Systems

    PS-INF-3.5KW is a state of the art, high power density, outdoor rated power supply designed by GVA Lighting for INFINITY circuits. Accepting a broad range of input voltages and delivering up to 3.5 kW of power from a compact and robust form factor, PS-INF-3.5KW enables circuit lengths upwards of 420 m (1377 ft). Read More…