Montreal Undertakes One of North America’s Largest Smart Lighting Projects

October 16, 2018

One of the largest smart lighting projects in North America, converting an entire city’s street lighting infrastructure from standard high-pressure sodium (HPS) fixtures to connected and remote-controlled LEDs, is underway in Montreal, Quebec. Set on an island in the St. Lawrence River, this cosmopolitan city has a population of more than two million people and is a cultural, economic and touristic powerhouse. Given its favourable geographical attributes, awesome lifestyle, and innovative culture, Montreal has become one of Canada’s fastest-growing cities, attracting and retaining a wide range of businesses as well as residents from all over the world.

The challenge

The city of Montreal plans to initially convert more than 132,000 fixtures from HPS to LEDS distributed through 19 boroughs. Among this number, 85,000 streetlights are cobra heads and the remaining 47,000 are decorative lights. In 2016, 70% of these fixtures reached their end-of-life expectancy and needed to be replaced. Consequently, the city took the decision to convert the HPS fixtures that it had been using for several years to LED fixtures, which require less energy and have higher life expectancy. Besides this modernization need, the lighting system at the time did not allow remote computerized management. Streetlights were equipped with a simple controller that used a photocell or an astronomical clock to turn them on or off. 

The whole infrastructure was obsolete and needed improvements that could accommodate new capabilities such as inventory management, maintenance management and telemetry.

Here is a non-exhaustive list of problems the city faced that prompted the city to convert its legacy lighting infrastructure into a smart lighting system:

  • impossible to guarantee street lighting performance
  • no inventory of deployed equipment was available
  • absence of a management system that could account for interventions and maintenance operations that were routinely performed on the lighting infrastructure
  • no scheduling function available
  • status of the equipment or maintenance operation could not be monitored or recorded for proper reporting
  • light intensity adjustment was not possible
  • no automated detection of faults
  • warranty management history not available
  • preventive measures to replace/maintain the equipment was impossible to plan ahead of time and therefore imprecisely budgeted

What’s being done

Montreal is now undertaking the LED streetlight conversion project, a $110 million investment to replace of all of its 132 500 high-pressure sodium (HPS) cobra head type with LED. The remaining 47,000 decorative and other types of fixtures will also be converted. Litenode wireless relays and Gateways from Dimonoff, combined with nodes from other companies are installed on every fixture throughout the city. Conversion began in December 2017 and is planned to be completed in 2022. 

Considering the proven leverage provided by smart street lights as a backbone for many smart city applications, Montreal positions itself once again at the forefront of innovation by combining its lighting infrastructure network with advanced metering and communications technology, enabling optimized management of all IoT city assets and devices already in use or installed in the future.

To manage all these new smart lighting fixtures, the city adopted SCMS Connect{ED} : a state-of the art IoT management platform developed by Dimonoff that can manage up to 2 billion assets and devices per system. Whether they are equipped with external nodes or internal nodes in the case of the decorative fixtures, no matter the brand of fixture, every streetlight will be remotely managed and diagnosed using a single platform. Specially equipped with RF communication combined with innovative, secure and robust firmware, Montreal’s streetlights can now be centrally managed along with the various sensors or IoT devices communicating with them. By deploying a secure smart city network over the entire city, the city is taking a big step forward in favor of the digital revolution.

In addition to this first phase of converting 132,500 streetlights, more than 110,000 lights of many types and installed in public and private areas such as parks, parking lots, bike lanes, sports venues, etc, are being added to the pipeline of lights to be converted and controlled using SCMS Connect{ED}.

Benefits

Besides providing the control of every street light remotely and in real time, SCMS Connect{ED} maps the city’s connected assets and devices and instantly detects their state of operation, allowing failures, power outage and other anomalies to be detected and efficiently resolved. The city can adjust the brightness of part or all of its street lights and measure the change in electricity consumption in real time. This multicomponent system allows for scalability and addresses the most important criteria of any innovative smart city network: security and adaptability/interoperability to new technologies and future applications. As a first newfangled IoT add-on remotely managed using DimOnOff’ SCMS Connect{ED}, Montreal is gradually integrating digital parking signs and digital snow removal panels.

Here are, in summary, the main advantages of Montreal’s smart lighting system:

  • real-time monitoring of lighting performance 24/7
  • real-time energy consumption
  • systematic up-to-date equipment and operations inventory
  • alarms are triggered when failures or service errors or interruption occur
  • customizable lighting control scenarios: events, absence of traffic, city operations, construction sites, 911 calls, etc.
  • optimization of maintenance planning
  • customizable assignment of control and management responsibilities of all smart city applications connected to the smart lighting network

The project at a glance

 

 

 

 

 

 

 

 

 

This article was first published online by Dimonoff, www.dimonoff.com/library/cases-studies/city-of-montreal/. Dimonoff develops and manufactures remote management system to control, monitor and meter light fixtures of all types for the municipal and commercial markets. The firm is based in Quebec City; www.dimonoff.com

Related Articles


Changing Scene

  • Aug 28, 2025 - JDRF Autonomy Lighting Suite Has Been Recognized in the IES 2025 Progress Report 1

    JDRF Autonomy Lighting Suite Has Been Recognized in the IES 2025 Progress Report

    JDRF is proud to share that the JDRF Autonomy Lighting Suite has been recognized in the IES 2025 Progress Report. The Autonomy Suite represents a major breakthrough in luminaire-level lighting control (LLLC) technology. It’s the first—and only—LLLC on the market today that uses AI to self-commission a system entirely without human involvement. The Autonomy Sensor eliminates the traditional trade-off… Read More…

  • Aug 27, 2025 - SLS Group Industries Announces Diana Nguyen as New Specification Sales Representative 1

    SLS Group Industries Announces Diana Nguyen as New Specification Sales Representative

    Please join SLS Group in welcoming Diana Nguyen to the team as their new Specification Sales representative! Diana has an educational background in Marketing with a focus on Sales. She began her career in the electrical industry in 2019 and have been specializing in lighting since early 2022. Diana is most passionate about lighting design… Read More…


Design

  • Say Goodbye to HID Lamps: Current’s LED Solution Is Ready

    Say Goodbye to HID Lamps: Current’s LED Solution Is Ready

    Did you know that starting in 2029, installing HID lamps will no longer be allowed? This regulatory transition is fast approaching — yet many buildings still rely on these outdated, energy-hungry technologies. Fortunately, Current is ahead of the curve. Its line of LED HID replacement lamps offers a simple, cost-effective, and sustainable solution to modernize lighting systems… Read More…

  • Light Bulb Base Types: Choose the Right One for Commercial Fixtures

    Light Bulb Base Types: Choose the Right One for Commercial Fixtures

    The light bulb base type may seem like an insignificant small component, but it plays a crucial role in connecting the power supply and the light source. Choosing the right bulb base types not only ensures the normal operation of the bulb but also directly affects the lighting cost, compatibility and maintenance. Whether it is… Read More…


New Products

  • Artika: Fitch Smart Foldable RGB LED Floor Lamp

    Artika: Fitch Smart Foldable RGB LED Floor Lamp

    With four adjustable, multicolour modules, the Fitch Smart LED floor lamp adapts to any setting. Use the base to stand it upright in the living room or mount it on the wall in a game room for a dynamic light bar effect. Control everything through the Artika Smart app. Choose the colour of each module… Read More…

  • Arani: SL4-VAR-R-BN-V4 – LED Slim Panel 4″ Brushed Nickel

    Arani: SL4-VAR-R-BN-V4 – LED Slim Panel 4″ Brushed Nickel

    The SL4-VAR-R-BN-V4 is a 4″ LED slim panel with a clean brushed nickel trim, built for recessed ceiling applications in residential and commercial settings. It offers 5 selectable color temperatures (2700K to 5000K), smooth Triac dimming, and now delivers up to 725 lumens at 4000K, providing improved brightness without added energy use. This IC-rated fixture… Read More…