LumenTruss 8870 Profile

LumenTruss 8870 Profile

Nov 3, 2020

The new 8870 profile is designed to disappear into the structure so that the light source merges with the surface.

The LED trays are perfectly smooth and allow the installation of two strip tapes (5.9 W/ft) side by side for maximum lighting power, or face to face for optimal light diffusion. A new feature: it can be used with all type B joiners to build a solid structure, and it fits directly with standard gypsum panels for an impeccable finish. Its refined look harmonizes perfectly with any design.

• Available in 96 in (2.43 m) lengths including 2 straight Type B joiners; profile can be cut onsite for easy and accurate installation

• Fits directly over standard 5/8″ gypsum panels; can also accept ½” panels with 1/8″ shims installed onsite

• On each side of the extrusion, the edges have grooves that reduce the space between the screws and the surface

• LED trays designed for two light sources installed sideby-side (5.9 W/ft) for maximum light output or face-to-face for optimal light distribution

• 10 LED light sources to choose from 2400 K to 6200 K, including WarmDim, RGB and RGBW

• Application guide for light sources of 10 mm (0.394″) or less in IP22

• Made of ALCOA 6063T5 aluminum alloy for increased heat dissipation

• Indoor use

Go HERE for more information.

Related Articles

Changing Scene


  • LIT Lighting Design Awards: Capital Park Landscape, Victoria, BC

    LIT Lighting Design Awards: Capital Park Landscape, Victoria, BC

    December 5, 2022 Located in one of Victoria’s most historic neighborhoods, the Capital Park Mixed-Use Development is made up of seven buildings stretching across three lots and is responsible for nearly an entire city block of Victoria’s downtown core. The project took place over the span of three phases and eight years. The first phase… Read More…

  • Smith + Andersen Toronto 2022 IES Award Winning Projects

    Smith + Andersen Toronto 2022 IES Award Winning Projects

    December 5, 2022 This year, the Smith + Andersen Lighting Team received the Toronto IES 2022 Illumination Section Award and the IESNA Illumination Award of Merit for two projects: Grasett Park (Exterior Lighting Design), and St Paul’s Church (Interior Lighting Design). Each of these Toronto-based projects demonstrate a level of design excellence expected by the… Read More…

New Products

  • Stanpro Retro 5 CCT Selectable Downlight

    Stanpro Retro 5 CCT Selectable Downlight

    December 1, 2022 This Retro LED downlight offers a simple and economical retrofit solution for all traditional recessed applications. Easy installed with a quick connects wire and the E26 socket adaptor, this LED downlight is ideal for retrofitting into most of traditional 4″ and 5″-6″ housings, it will be installed in no time. The color… Read More…

  • Eureka Introduces Tangram-Trace Architectural Luminaire

    Eureka Introduces Tangram-Trace Architectural Luminaire

    November 30, 2022 Eureka announced the release of its Tangram-Trace architectural luminaire. Using bold straps and a prismatic lens, Tangram-Trace creates a dramatic aesthetic and provides high quality, diffused linear illumination. It is intended for modern environments such as conference and executive areas, hospitality applications, or reception spaces. Tangram-Trace luminaires are suspended using four-inch-wide straps,… Read More…